$37.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The 6mm Creedmoor has earned its reputation in precision circles for a reason, and the brass underneath every load matters just as much as the bullet on top. This Hornady unprimed brass gives reloaders a clean, dependable starting point whether you're building loads for a Ruger Precision Rifle, a custom bolt gun, or a competition setup chasing tight groups at distance. Each case comes new and unprimed, so you have full control over primer selection, powder charge, and seating depth from the first firing.
Hornady treats brass as the backbone of an accurate cartridge rather than an afterthought. These cases are measured for tight wall concentricity and uniform wall thickness, which translates to more consistent bullet seating and steadier chamber pressures when you touch off a round. Hornady also runs its brass through a pressure calibration test to confirm uniform case expansion during firing, and uniform weight and internal capacity help keep your velocities and standard deviations in a tighter window.
If you've reloaded 6.5 Creedmoor before, the 6mm will feel familiar since case prep and powder selection follow the same playbook. Popular powders like H4350 and RL16 pair well with 105 to 110 grain match bullets such as the ELD-M, Berger Hybrids, and Sierra offerings. With proper sizing, trimming, and annealing as the brass ages, reloaders regularly report excellent accuracy and solid case life. This is new, unprimed brass only and not loaded ammunition, so you'll supply your own primers, powder, and projectiles.
Hornady has built a long track record making components that precision shooters lean on, and this 6mm Creedmoor brass carries that same attention to detail. For anyone serious about squeezing the best out of a 6mm Creedmoor rifle, it's a reliable platform to build on and prep to your own spec.
These cases are new and unprimed, so you'll install your own primers during the reloading process. This gives you full control over primer selection to match your load. Keep in mind this is brass only and not loaded ammunition.
Standard Hornady 6mm Creedmoor brass uses a large rifle primer pocket. Popular choices among reloaders include CCI 200 and CCI BR2 large rifle match primers. Always confirm your pocket size before ordering primers.
Case life depends on your charge weights, sizing practices, and whether you anneal as the brass ages. With careful full-length or neck sizing and good load development, reloaders typically get multiple firings per case. Staying off maximum pressures and annealing periodically will stretch that number further.
H4350 and Reloder 16 are longtime favorites paired with 105 to 110 grain match bullets like the Hornady ELD-M, Berger Hybrids, and Sierra MatchKings. The cartridge mirrors 6.5 Creedmoor case prep, so the transition is easy if you've loaded that round before. Always start low and work up using published load data.
| UPC | 090255862805 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 86280 |
| Caliber/Gauge | 6mm Creedmoor |
| Length | 5.6000 |
| Product Type | Rifle |
| Quantity | 50 Per Box |
| Shipping Weight | 1.16 |
You must be logged in to post a review.
Reviews
There are no reviews yet.