Description
The Hornady CX bullet is the evolution of the well-regarded GMX, and it brings a lot to the table for handloaders chasing lead-free performance. Each 100 grain projectile is machined from a single piece of copper alloy, so there's no jacket to separate from a core on impact. That solid construction is what gives the CX its reputation for driving deep and holding together, with weight retention sitting right around 95% after it does its work. At .277 diameter, this one drops right into 6.8mm and .270 caliber loads, from the 6.8 SPC and .270 Winchester all the way to the newer 6.8 Western.
What Sets the CX Bullet Apart
Up front you'll find Hornady's Heat Shield tip, a polymer design that resists the aerodynamic heating that can soften lesser tips during flight. That means the bullet keeps its shape and its ballistic coefficient stays consistent all the way to the target, with a G1 BC of .262 on this 100 grain load. The tip also gives every bullet a uniform meplat, which translates to better bullet-to-bullet and lot-to-lot consistency when you're working up a load.
Loading the 6.8mm CX for the Hunt
The grooved shank is more than just looks. Those relief grooves reduce bearing surface and fouling, so you get cleaner barrels and smoother pressure behavior as you tune your powder charge. Being fully lead-free, the CX is a natural pick for hunters in areas that call for nontraditional bullets, and it performs well on everything from deer and antelope up through larger medium game. If you reload for a fast .277 cartridge, this 100 grain CX gives you flat-shooting manners without giving up the terminal punch you want when it counts.
Keep in mind these are component projectiles, not loaded ammunition. They're meant for reloading into your own prepped cases, so you'll want your dies, powder, and primers squared away before you sit down at the bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 271904
- UPC: 090255719512
- Bullet Line: CX (Copper alloy eXpanding)
- Caliber: 6.8mm / .270 Caliber
- Bullet Diameter: .277 in
- Bullet Weight: 100 grain
- Bullet Type: Monolithic Copper Alloy, Polymer Tipped
- Ballistic Coefficient (G1): .262
- Sectional Density: .186
- Weight Retention: Approximately 95%
- Construction: One-piece copper alloy, lead-free
- Quantity: 50 per box
What’s Included
- 50 Hornady CX 6.8mm/.277 100 grain copper solid bullets (projectiles only)
Frequently Asked Questions
Are the Hornady CX 6.8mm bullets loaded ammunition or just projectiles?
These are component bullets only, not finished ammunition. They're intended for handloaders to seat into their own prepped and primed cases. You'll need your own brass, powder, primers, and dies to assemble a complete cartridge.
What cartridges can I load the .277 100 grain CX bullet in?
The .277 diameter makes this bullet a fit for 6.8mm and .270 caliber cartridges, including the 6.8 SPC, .270 Winchester, and 6.8 Western. Always consult current load data for the specific cartridge you're building. The 100 grain weight is on the lighter end, which pairs nicely with faster, flatter-shooting loads.
How much weight does the CX bullet retain after impact?
Because it's machined from a single piece of copper alloy, the CX holds together instead of shedding a core. Hornady reports roughly 95% weight retention, which drives deep, consistent penetration on game. That construction is a big part of why it's trusted for medium game hunting.
What is the Heat Shield tip on the Hornady CX bullet for?
The Heat Shield tip is a heat-resistant polymer that stands up to aerodynamic heating in flight, so the bullet keeps its shape and ballistic coefficient downrange. It also gives every bullet a uniform tip for better consistency from bullet to bullet and lot to lot. This 100 grain load carries a G1 BC of .262.




Reviews
There are no reviews yet.