Description
This five-piece bushing set is the measuring heart of the Hornady Lock-N-Load Headspace Comparator system. The bushings thread onto the B-2000 comparator body and ride on your calipers, letting you measure from the case head to the datum line on the shoulder. That single measurement tells you exactly how much your shoulder is bumping back during full-length sizing, which is the kind of info that separates brass that lasts a handful of loadings from brass that goes a dozen or more. Keep in mind this is the bushings only, so you'll need the comparator body and a set of calipers to put them to work.
What the Lock-N-Load Headspace Bushings Cover
The set includes .330, .350, .375, .400, and .420 diameter bushings, and that spread handles most bottleneck cartridges out there, from .17 Rem all the way up through belted magnums. The .400 bushing alone covers a ton of popular rounds like .308 Winchester, .243 Winchester, 7mm-08, and .260 Remington, while the .350 handles the likes of 6.5 Creedmoor, 300 Blackout, and 6.5 Grendel. Running an Ackley Improved wildcat? You use the same bushing size as the parent case. If you're not sure which one fits a given cartridge, add the neck diameter and shoulder diameter together and divide by two, then grab the bushing closest to that number.
Why Reloaders Reach for the Headspace Comparator Bushings
Shoulder bump is one of those details that quietly makes or breaks precision handloading. Bump the shoulder back too far and you're overworking the brass, which leads to case stretching, thinning near the web, and early head separation. Bump it just enough, usually one to two thousandths for a full-length sized case, and you get reliable chambering with minimal clearance. Measuring fired brass against your resized brass with these bushings takes the guesswork out of dialing in a sizing die, and it's a repeatable check you can come back to every time you set up a new cartridge. For anyone chasing tighter groups or just trying to get the most life out of good brass, this is a small tool that earns its spot on the bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: HK55
- Model: HK55
- UPC: 090255704792
- Bushing Count: 5
- Bushing Diameters: .330, .350, .375, .400, .420
- Cartridge Range: .17 Rem through belted magnums
- Compatibility: Lock-N-Load B-2000 comparator body
- Bushing Type: Interchangeable
- Shipping Weight: 0.26 lb
What’s Included
- 5 headspace comparator bushings (.330, .350, .375, .400, .420 diameter)
Frequently Asked Questions
Does this Hornady headspace bushing set come with the comparator body?
No, this listing is the five bushings only. You'll need the Lock-N-Load B-2000 comparator body, which is the same body used on the Hornady bullet comparator, plus a set of dial or digital calipers to take measurements. If you already own a comparator body from a bullet comparator kit, this set is all you need to add headspace checks.
What cartridges do these headspace comparator bushings work with?
The five bushings cover most bottleneck cases from .17 Rem up through belted magnums. The .400 handles common rounds like .308 Winchester, .243, and 7mm-08, while the .350 fits 6.5 Creedmoor, 300 Blackout, and more. To pick the right one for any cartridge, add the neck and shoulder diameters and divide by two, then use the bushing closest to that figure.
How much should I bump the shoulder back when sizing?
For full-length resized brass, Hornady recommends setting the shoulder back about .001 to .002 inches. That gives proper minimal clearance in the chamber while keeping case stretching to a minimum. Measuring with these bushings lets you dial your sizing die to hit that number consistently.
Are the Hornady headspace bushings interchangeable?
Yes, all five bushings are interchangeable and thread onto the same comparator body. You simply swap the bushing that matches your cartridge, lock it in place with the thumbscrew, and measure. This makes it easy to jump between calibers on the same bench setup.





Reviews
There are no reviews yet.