Description
The Hornady SST-ML pairs a .400-inch, 200 grain Super Shock Tip bullet with a low-drag sabot built to fit .45 caliber muzzleloaders. That combo lets you push a lighter, more aerodynamic bullet downrange for a flatter flight path and less felt recoil, without giving up the punch you want on medium game. With a G1 ballistic coefficient of .265 and a sectional density of .179, it holds its speed and stays predictable at extended distances, which is exactly what you want when a big buck steps out at the far edge of your comfort zone.
Why the SST-ML Sabot Loads and Shoots Better
A lot of easy-load bullets never really grab the rifling, and when that happens accuracy falls apart. The Hornady sabot is designed to fully engage the rifling and seal the bore, keeping the bullet centered and sealed as it leaves the barrel. That gas seal is what delivers the velocity and shot-to-shot consistency this bullet is known for. Hornady also builds this sabot to load noticeably easier than conventional designs, so you spend less time fighting your ramrod and more time settling in on target.
Flex Tip Expansion When It Counts
The SST-ML uses Hornady's patented Flex Tip design, which does double duty. In flight, that polymer tip sharpens the bullet's profile for a better ballistic coefficient. On impact, the tip compresses back into the core to kick off rapid, controlled expansion and strong weight retention. The result is a deep, wide wound channel and reliable energy transfer, making it a solid pick for game in the 50 to 300 pound range.
Real-World Muzzleloader Range
Run through a typical inline with a 150 grain charge, this load leaves the muzzle around 2,325 fps and still carries meaningful energy well past the 200 yard mark. For blackpowder hunters chasing deer and similar game who want dependable accuracy and terminal performance at distance, the SST-ML is a proven choice that has earned its reputation in the field.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 67132
- UPC: 090255671322
- Caliber: .45 Cal Sabot
- Bullet Diameter: .400 in
- Bullet Weight: 200 gr
- Bullet Style: Low Drag SST (Super Shock Tip) with Flex Tip
- Ballistic Coefficient: .265 (G1)
- Sectional Density: .179
- Muzzle Velocity: Approx. 2,325 fps (150 gr charge)
- Recommended Application: Medium game 50-300 lbs
- Sabot Color: Tan
- Box Count: 20
- Country of Origin: Made in USA
What’s Included
- 20 Hornady SST-ML .400-inch 200 grain SST bullets
- 20 low-drag sabots (pre-fitted for .45 caliber muzzleloaders)
Frequently Asked Questions
What muzzleloader does the Hornady SST-ML fit?
This load is built for .45 caliber muzzleloaders. The .400-inch, 200 grain SST bullet comes matched with a low-drag sabot sized to fit .45 cal bores. It works especially well in modern inline rifles where you want flat trajectories and long-range accuracy.
Do I need to buy sabots separately for the SST-ML?
No. The bullets ship with the sabots already included, so each of the 20 bullets is paired with its own sabot right out of the box. You just seat the bullet-and-sabot combo over your powder charge and you're ready to go.
How far will the SST-ML shoot accurately?
Hornady designed this bullet with long-range blackpowder hunters in mind, and it holds up well past 200 yards. Fired from a typical inline with a 150 grain charge, it leaves the muzzle around 2,325 fps and still carries solid energy at distance. The Flex Tip and low-drag profile keep the trajectory flat and the accuracy consistent.
What game is the SST-ML best suited for?
It's rated for medium game in the 50 to 300 pound range, which covers deer and similar animals. The Flex Tip drives controlled expansion and strong weight retention for a deep, effective wound channel. That makes it a dependable choice for hunters who want reliable terminal performance.





Reviews
There are no reviews yet.