0
0

Hornady Match Grade .333 Neck Sizing Bushing, .30 Cal (594333)

UPC: 090255593334

$23.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady Match Grade .333 bushing is the small part that makes a big difference when you're reloading for accuracy. It's a polished steel neck sizing bushing that drops into Hornady Match Grade bushing dies and lets you control exactly how much you size the neck of your .30 caliber brass. Instead of squeezing every neck down to one fixed diameter like a standard die, you pick the bushing that gives you the neck tension you want, which keeps you from oversizing and overworking your cases.

How the .333 Match Grade Bushing Works

The bushing is self-centering and free-floating inside the die body, so it aligns itself to the case neck as the round comes up. That design is what keeps runout down and concentricity tight, which is exactly what you're after if you're loading for a bolt gun or chasing numbers on paper. It works in both the Hornady Match Grade full length sizing die, which sizes the body, bumps the shoulder, and sizes the neck, and the Match Grade neck sizing die, which just bumps the shoulder and sizes the neck. Installation is quick: drop it into the die numbers down, then set your decapping rod against it.

Picking the Right .333 Bushing Size

Hornady offers these bushings in close increments so you can tune neck tension to your specific brass and bullet combo. The standard starting point is to measure the outside neck diameter of a loaded or dummy round with a micrometer and subtract about .002 inches. If your loaded .30 caliber round measures around .335, the .333 lands you in the neighborhood of two thousandths of neck tension, which is a solid all-around number for most hunting and target loads. Because neck wall thickness varies between brass brands, a lot of handloaders keep one size above and one below on hand so they can fine-tune. Each bushing is sold as a single unit.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 594333
  • UPC: 090255593334
  • Bushing Diameter: .333 inch
  • Caliber: .30 Caliber
  • Material: Polished steel
  • Type: Neck sizing die bushing
  • Design: Self-centering, interchangeable
  • Compatibility: Hornady Match Grade full length and neck sizing dies
  • Quantity: 1
  • Shipping Weight: 0.25 lb

What’s Included

  • One Hornady Match Grade .333-inch neck sizing bushing

Frequently Asked Questions

What dies does the Hornady Match Grade .333 bushing fit?

This bushing is made for Hornady Match Grade bushing dies. It works in both the Match Grade full length sizing die and the Match Grade neck sizing die. The full length die sizes the body, bumps the shoulder, and sizes the neck with the bushing, while the neck die bumps the shoulder and sizes only the neck.

How do I know if .333 is the right bushing size for my load?

The common method is to measure the outside neck diameter of a loaded or dummy round with a micrometer, then subtract about .002 inches for neck tension. If your loaded .30 cal round measures around .335, the .333 bushing is a good starting point. Since neck wall thickness varies between brass brands, measure your own loaded rounds rather than going off chamber specs.

Is this .333 bushing self-centering?

Yes. The bushing floats freely inside the die body so it self-centers on the case neck as the round is sized. That design helps keep neck runout low and produces concentric necks, which is part of what gives the Match Grade system its accuracy edge.

Does this bushing let me avoid overworking my brass?

That's the whole idea behind it. Because you choose a bushing that sizes the neck down only as much as you need, you avoid the oversizing that happens with standard dies that squeeze every neck to one fixed diameter. Less working of the brass means longer case life and more consistent neck tension.

Additional information

UPC

090255593334

Manufacturer

Manufacturer Part Number

594333

Shipping Weight

0.25

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade .333 Neck Sizing Bushing, .30 Cal (594333)”