Description
The Hornady Match Grade Bushing in .311" diameter is the little piece that makes a Hornady Match Grade bushing die do its job. Instead of relying on a fixed neck size, you drop this bushing into the die body and it controls exactly how much the case neck gets squeezed down. That means you get to pick your own neck tension rather than taking whatever a standard sizing die hands you. This is a 7mm caliber bushing, and it's sold on its own since the Match Grade dies ship without a bushing installed.
What the .311" Match Grade Bushing Does at the Press
The design is self-centering, so the bushing floats inside the die and stays concentric with the case as it sizes the neck. That floating action is a big reason handloaders like this system. It keeps runout down and sizes the neck evenly all the way around. Because the bushing only touches the neck, you avoid oversizing and overworking your brass, which keeps your cases alive longer and helps groups tighten up. It works in both the full-length and neck-only Match Grade die bodies, so you've got flexibility depending on how you like to size.
Picking the Right Hornady Bushing Size
Getting the size right comes down to your brass. A common method is to measure the outside neck diameter of a loaded round and subtract about .002" to .003" for your neck tension, accounting for a touch of brass spring-back. You can also measure neck wall thickness, double it, add your bullet diameter, then subtract your preferred tension. Because brass thickness varies by brand, a lot of folks keep a bushing one size above and below their target on hand to fine-tune. Hornady offers these in .001" steps across the lineup, so once you figure out your number you can zero right in.
Built for Consistency
This bushing is machined from polished steel to tight tolerances, which is exactly what you want when the goal is repeatable ammo. Tight work at the bench shows up as tighter groups downrange, and that's the whole point of running a bushing system. Reloaders chasing accuracy on 7mm cartridges reach for these to get neck tension dialed in just the way they want it.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 594311
- UPC: 090255593112
- Bushing Diameter: 0.311 in
- Caliber Application: 7mm
- Type: Neck Sizing Bushing
- Finish: Polished Steel
- Design: Self-centering, interchangeable
- Compatibility: Hornady Match Grade full-length and neck sizing dies
- Outside Diameter: .750 in
- Quantity: 1
- Shipping Weight: 0.025 lb
What’s Included
- One (1) Hornady Match Grade .311" neck sizing bushing
Frequently Asked Questions
What dies does the Hornady Match Grade .311" bushing fit?
It's designed for the Hornady Match Grade bushing dies and drops into both the full-length sizing and neck-only sizing die bodies. The Match Grade dies ship without a bushing, so you add the size you need separately. The bushing self-centers inside the die body once installed.
How do I know if the .311" bushing is the right size for my brass?
A simple approach is to measure the outside neck diameter of a loaded round and subtract about .002" to .003" for your neck tension, which also accounts for brass spring-back. You can also measure your neck wall thickness, double it, add your bullet diameter, then subtract your preferred tension. Since brass thickness varies between brands, many reloaders keep a size above and below on hand to fine-tune.
Is this bushing for 7mm cartridges?
Yes, the .311" diameter falls into the 7mm application range. Keep in mind the exact bushing you need depends on your specific brass and the neck tension you're after, so the .311" works for some 7mm setups but not all of them. Measure your brass to confirm before committing.
Why use a bushing instead of a standard sizing die?
A bushing lets you control exactly how much the neck gets sized rather than taking the fixed amount a standard die provides. Because it only works the neck and self-centers as it sizes, you avoid oversizing and overworking the brass, which extends case life and helps consistency. That tighter control at the press is what translates into tighter groups downrange.



Reviews
There are no reviews yet.