0
0

Hornady Match Grade Die Bushing .279″ Neck Sizing Bushing

UPC: 090255592795

$23.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady Match Grade .279" die bushing is a single interchangeable neck sizing bushing built to let you fine-tune neck tension on your handloads. Instead of relying on a fixed-diameter sizer, you drop the correct bushing into your Match Grade die and size the neck down to the exact dimension your load calls for. That level of control is what separates good brass prep from great brass prep, and it adds up to more consistent seating and tighter groups downrange.

Why the .279" Bushing Matters at the Press

Neck sizing with a dedicated bushing lets you size only as much as you need, which keeps you from overworking the brass and spring-working the necks harder than necessary. The .279" size falls into a lineup Hornady offers in small increments, so you can measure a loaded round, subtract the amount of tension you want, and pick the bushing that matches. The self-centering design means the bushing floats to align itself with the case neck as it enters, keeping runout low and necks concentric.

Cross-Brand Compatibility of the Hornady Match Grade Bushing

One of the best parts about this bushing is that it isn't locked to one press setup. The Hornady Match Grade bushings are interchangeable with Redding, Wilson, and RCBS bushing dies, so if you already run a Type S die or an RCBS Gold Medal setup, this bushing will fit right in. That makes it easy to fill a gap in your bushing collection without committing to a whole new die system.

Picking the Right Size

This bushing is sold on its own, which is the standard way these are offered since every reloader needs a different diameter for their cartridge and brass. A common approach is to measure the neck diameter of a loaded, seated round and choose a bushing a couple thousandths under that figure to set your neck tension. If you're new to bushing dies, keep a caliper handy and start conservative, then work down until the tension feels right for your rifle and load.

Key Specifications

  • Bushing Diameter: .279 inch
  • Type: Neck sizing bushing
  • Design: Self-centering, interchangeable
  • Compatibility: Hornady Match Grade, Redding, Wilson, and RCBS bushing dies
  • Manufacturer: Hornady
  • Manufacturer Part Number: 594279
  • UPC: 090255592795
  • Shipping Weight: 0.026 lb

What’s Included

  • One Hornady Match Grade .279" neck sizing die bushing

Frequently Asked Questions

Does the Hornady Match Grade .279" bushing fit Redding and RCBS dies?

Yes. These Hornady Match Grade bushings are interchangeable with Redding, Wilson, and RCBS bushing dies. If you already run a Type S or Gold Medal setup, this bushing will seat right in without any issue.

How do I know if .279" is the right bushing size for me?

Measure the neck diameter of a loaded, seated round with a caliper, then choose a bushing a couple thousandths under that number to set your neck tension. If a loaded neck measures around .281 and you want roughly two thousandths of tension, the .279 lands right in that window. Start conservative and work down until the tension matches your rifle and load.

Is this bushing sold by itself or with a die?

It's sold on its own. Bushings are offered individually because every cartridge and brass combination calls for a different diameter, so you buy the exact size you need to complete or supplement your Match Grade die setup.

What does a self-centering bushing actually do?

The bushing floats inside the die rather than sitting fixed, so it aligns itself to the case neck as the case enters. That keeps runout low and necks concentric, which translates to better bullet seating and more consistent results on target.

Additional information

UPC

090255592795

Manufacturer

Manufacturer Part Number

594279

Shipping Weight

0.026

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade Die Bushing .279″ Neck Sizing Bushing”