0
0

Hornady .277 Match Grade Die Bushing | Interchangeable Neck Sizing Bushing

UPC: 090255592771

$23.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady .277 Match Grade Bushing is a single interchangeable neck sizing bushing built to work inside Hornady Match Grade Bushing Dies. Instead of being locked into one fixed neck size, you swap bushings to control precisely how much the die squeezes the case neck. That control is the whole point of bushing-style reloading, since it lets you size only what you need and keep your brass alive a lot longer.

What the .277 Bushing Does at the Press

The self-centering design floats as the case enters the die, which helps keep everything concentric through the sizing stroke. Hornady machines these to tight tolerances so the .277 performs the same way load after load, taking one common source of variation off the table. Because you choose the diameter rather than relying on an expander ball to do the final sizing, the neck isn't worked twice, and that translates into straighter necks and more uniform bullet pull. Tighter tolerances at the bench tend to show up as tighter groups downrange.

Picking the Right Hornady Match Grade Bushing Size

The .277 refers to the inside diameter of the bushing, and the correct number for your setup depends on your brass neck wall thickness. A simple method is to measure the outside neck diameter of a loaded round and subtract .002 to .003, which accounts for brass spring back and leaves you with roughly .001 to .002 of neck tension. You can also measure neck wall thickness directly, double it, add your bullet diameter, then subtract for tension. Since bushings come in .001 inch increments, a lot of reloaders keep one size above and one below their target so they can tune on the spot.

Cross-Brand Compatibility

One of the nicer things about these bushings is that they aren't a closed system. The .277 bushing is compatible with LE Wilson, RCBS, and Redding bushing-style dies, so if you already run a mixed bench you can slot it right in. Whether you're building bolt gun match loads or just want longer brass life, having the exact bushing on hand makes the whole process repeatable.

Key Specifications

  • Manufacturer: Hornady
  • Bushing Diameter: .277 inch (inside diameter)
  • Type: Interchangeable Neck Sizing Bushing
  • Design: Self-Centering
  • Size Increments: .001 inch
  • Compatibility: Hornady Match Grade Bushing Dies, LE Wilson, RCBS, Redding bushing-style dies
  • Manufacturer Part Number: 594277
  • UPC: 090255592771
  • Sold As: Individual bushing

What’s Included

  • One (1) Hornady .277 Match Grade neck sizing bushing

Frequently Asked Questions

What size neck tension will the .277 Hornady Match Grade Bushing give me?

That depends on your brass and bullet diameter, since .277 is the inside diameter of the bushing itself. A common approach is to measure the outside neck diameter of a loaded round and subtract .002 to .003, which allows for brass spring back and gives you roughly .001 to .002 of neck tension. The .277 fits reloaders whose loaded neck measurements land in that neighborhood.

Does the Hornady .277 Match Grade Bushing work in Redding or RCBS dies?

Yes. These bushings are compatible with LE Wilson, RCBS, and Redding bushing-style dies in addition to Hornady Match Grade Bushing Dies. That makes them a flexible option if your bench already runs more than one brand of bushing die.

Is a bushing all I need, or do I also need a die?

The bushing is sold on its own and requires a Hornady Match Grade Bushing Die (or a compatible Wilson, RCBS, or Redding bushing die) to function. The die does the sizing work, and the bushing determines the final neck diameter. Many handloaders keep several bushing sizes around one die to tune neck tension.

How do I know whether to buy the .277 or a neighboring size?

Measure your loaded round neck or your brass neck wall thickness and work out your target bushing from there. Because Hornady offers these in .001 inch increments, it's smart to grab one size above and one below your calculated number. Brass can spring back differently from lot to lot, so having options lets you dial it in without guessing.

Additional information

UPC

090255592771

Manufacturer

Manufacturer Part Number

594277

Shipping Weight

0.026

Reviews

There are no reviews yet.

Be the first to review “Hornady .277 Match Grade Die Bushing | Interchangeable Neck Sizing Bushing”