Description
This is the .256" diameter neck sizing bushing for the Hornady Match Grade die system. It drops into a Match Grade full length or neck sizing die body and handles the job of sizing the case neck to the exact tension you're after. Because the bushing is self-centering inside the die, it stays concentric with the case and sizes the neck evenly all the way around, which is a big part of why these dies earn their reputation at the loading bench.
The idea behind the bushing setup is simple. Instead of a die that only offers one fixed amount of neck sizing, you pick the bushing diameter that gives you the neck tension your load likes. Bushings come in .002" increments, so you can fine tune how much grip the neck puts on the bullet. Less unnecessary sizing means you're working the brass less, which helps case life and keeps your neck dimensions repeatable from one loading session to the next.
How the .256" Match Grade Bushing Fits Your Setup
This bushing is a component, not a complete die. It's meant to go into a Hornady Match Grade bushing die, either the full length version that sizes the body, bumps the shoulder and sizes the neck, or the neck die that bumps the shoulder and sizes the neck only. The free-floating spindle and knurled spindle lock on those dies make swapping bushings quick when you want to try a different tension.
Picking the Right .256" Bushing Diameter
The number stamped on the bushing is the finished inside diameter of your sized case neck. The common way to choose is to measure the neck wall thickness of your loaded round, then subtract to land on the tension you want, usually a couple thousandths under loaded neck diameter. If you're loading a cartridge that ends up right around that .256" range once sized, this is your bushing. When in doubt, measuring your own fired and loaded brass beats guessing, since neck thickness varies by brass brand and caliber.
Key Specifications
- Manufacturer: Hornady
- Bushing Diameter: .256 in
- Type: Self-Centering Neck Sizing Bushing
- Compatibility: Hornady Match Grade Bushing Dies (full length and neck sizing)
- Available Increments: .002 in
- Quantity: 1 bushing
- Manufacturer Part Number: 594256
- UPC: 090255592566
- Shipping Weight: 0.25 lb
What’s Included
- One (1) Hornady Match Grade .256" neck sizing bushing
Frequently Asked Questions
What does the .256" measurement on the Match Grade Bushing refer to?
That number is the finished inside diameter of the case neck after sizing. To pick the right bushing, measure the outside neck diameter of a loaded round and choose a bushing that sizes a couple thousandths under that for proper bullet grip. Because brass wall thickness varies by brand, measuring your own loaded brass is the most reliable way to land on the correct size.
Will this bushing work on its own as a sizing die?
No, the .256" bushing is a component that installs inside a Hornady Match Grade bushing die body. You'll need either the Match Grade full length sizing die or the neck sizing die to use it. The die handles shoulder bump and body sizing while the bushing controls the neck.
Why choose a bushing die setup over a standard sizing die?
Bushings let you control exactly how much neck tension you put on the bullet by swapping to different diameters in .002" steps. The self-centering design sizes the neck evenly and keeps you from overworking the brass. That translates to longer case life and more consistent neck tension, which precision reloaders care about.
Is this bushing interchangeable with other Hornady Match Grade bushings?
Yes. All Hornady Match Grade bushings share the same outside dimensions and drop into the same die body, so you can swap between diameters to fine tune your load. The knurled spindle lock on the die makes changing them quick at the bench.



Reviews
There are no reviews yet.