0
0

Hornady Match Grade .243 Diameter Neck Sizing Bushing #594243

UPC: 090255592436

$23.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .243 diameter neck sizing bushing for Hornady's Match Grade die system. It drops into the die body and controls how much the case neck gets squeezed down, which means you decide the amount of neck tension instead of letting a one-size-fits-all die do it for you. The bushing is machined from polished steel and runs a .750 outside diameter so it seats cleanly in the die.

Worth noting up front: this is the bushing only. It's a separate, interchangeable component that fits into Hornady's Match Grade full-length and neck sizing dies, and it does not come with the die itself. Hornady builds these in small size increments so you can fine-tune to your exact brass, and they're cross-compatible with common bushing-die standards from Redding, Wilson, and RCBS if that's already what's on your bench.

What the .243 Hornady Match Grade Bushing Does on the Press

Standard sizing dies crush the whole neck down and then drag an expander ball back through it, which overworks the brass. A bushing like this one sizes only the outside of the neck to a set diameter, so there's far less working of the case. Less overworking means longer brass life and more consistent tension from round to round, and that consistency is what shows up as tighter groups when you're loading for accuracy.

Picking the Right Hornady Bushing Size

The .243 measurement is the inside diameter the bushing sizes your neck to, not the caliber of your rifle. The common way to land on the right number is to measure the outside neck diameter of a loaded round with a micrometer and subtract about .002 to .003 inches for your desired neck tension, which accounts for roughly a thousandth of brass springback. These bushings work best with brass that has uniform neck wall thickness or has been neck turned, since inconsistent necks will give you inconsistent tension. A lot of folks keep a bushing one size above and one below their target so they can experiment during load development.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 594243
  • UPC: 090255592436
  • Bushing Inside Diameter: .243 inch
  • Outside Diameter: .750 inch
  • Finish: Polished Steel
  • Type: Interchangeable Neck Sizing Bushing
  • Fits: Hornady Match Grade full-length and neck sizing dies
  • Cross Compatibility: Redding, Wilson, and RCBS bushing dies
  • Quantity: 1
  • Shipping Weight: 0.03 lbs

What’s Included

  • One (1) Hornady Match Grade .243 diameter neck sizing bushing

Frequently Asked Questions

Does the Hornady Match Grade .243 bushing come with a die?

No, this is the bushing by itself. It's a separate, interchangeable component that fits into Hornady's Match Grade full-length and neck sizing dies, and the die is sold separately. You'll need a Match Grade die body for it to work.

Is the .243 the caliber of my rifle or the size of the neck?

The .243 refers to the inside diameter the bushing sizes your case neck down to, not your rifle's caliber. To find the right number, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches for your desired neck tension. That accounts for the small amount of springback in the brass.

Will this Hornady bushing work in my Redding or RCBS die?

Yes. Hornady builds these to be interchangeable with common bushing-die standards, including Redding, Wilson, and RCBS setups. If you're already running one of those systems, this bushing will drop in and work.

Why use a bushing instead of a standard sizing die?

A standard die sizes the whole neck down and then expands it back out with a ball, which overworks the brass. A bushing sizes only the outside of the neck to a set diameter, so the brass gets worked less and lasts longer. It also gives you control over neck tension, which helps with consistency and accuracy, especially with uniform or neck-turned brass.

Additional information

UPC

090255592436

Manufacturer

Manufacturer Part Number

594243

Shipping Weight

0.03

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade .243 Diameter Neck Sizing Bushing #594243”