Description
Reloading for the .444 Marlin means you're feeding a hard-hitting lever gun, and this Hornady Custom Grade Series II 3-Die Set covers the full cycle of building that big .43 caliber round. The set includes a full-length sizer die, an expander die, and a bullet seating die, which is everything you need to turn fired brass into fresh, consistent handloads. Hornady machines and polishes the internal die profile to a smooth finish, so cases feed in and out without sticking or dragging across the surface.
What Sets the Hornady .444 Marlin Die Set Apart
The standout here is the Zip-Spindle design. Light threads are cut into both the spindle and the spindle collet, so you can fine-tune seating depth in small increments by turning the spindle, or zip it up and down fast for bigger changes. It locks down positively to eliminate slippage, and it takes the knuckle-busting out of tightening the spindle lock. The Sure-Loc lock rings clamp around the entire die body and apply constant pressure across the threads, so your settings stay put once you've dialed them in.
Building Rounds With the Series II 3-Die Set
The full-length sizer brings brass back to SAAMI minimum specs for reliable chambering, the expander opens the case mouth for seating, and the seater die features an in-line bullet seating system that aligns each bullet in the sleeve as it enters the die. That alignment helps with runout and keeps your loads consistent. The seater also has a built-in crimper, so you can roll a crimp without burning a separate station on your press, which matters for tube-fed lever cartridges like the .444. A locking retainer ring at the base of the seater pops out in seconds for quick cleaning and disassembly.
Everything arrives in a compartmentalized Hornady die storage box that stacks and stays organized on the bench, with room for the dies, shell holder, and bushings. These Custom Grade dies are guaranteed never to break or wear out from normal use, so this is a one-and-done purchase for your .444 setup.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546551
- UPC: 090255565515
- Caliber: .444 Marlin
- Product Type: Custom Grade Series II 3-Die Set
- Ammunition Type: Rifle
- Bullet Diameter: 0.430 in
- Shell Holder: #27 (390567)
- Shell Plate: #27 (392627)
- Spindle System: Zip-Spindle
- Lock Rings: Sure-Loc with wrench flats
- Crimp: Built-in crimper
- Country of Origin: United States
- Shipping Weight: 1.75 lbs
What’s Included
- Full-length sizer die
- Expander die
- Bullet seating die with built-in crimper
- Sure-Loc lock rings
- Spindle lock and decap assembly
- Compartmentalized Hornady die storage box
Frequently Asked Questions
What dies come in the Hornady Series II .444 Marlin set?
The set includes three dies: a full-length sizer, an expander, and a bullet seater. The sizer resizes brass to SAAMI minimum specs, the expander opens the case mouth for seating, and the seater places and crimps the bullet. Together they cover the full reloading cycle for the .444 Marlin.
Does the seating die include a crimp, or do I need a separate crimp die?
The seater die has a built-in crimper, so you can apply a crimp in the same step as seating without adding a separate die or giving up a station on your press. That's handy for tube-fed lever guns chambered in .444 Marlin, where a solid crimp helps keep rounds consistent under recoil.
What shell holder do I need for the .444 Marlin dies?
The .444 Marlin uses a Hornady #27 shell holder (part 390567), and a #27 shell plate (392627) if you're running a progressive press. The shell holder is not included with the die set, so you'll want to grab the correct one separately if you don't already have it.
What is the Zip-Spindle design on these Hornady dies?
Zip-Spindle uses light threads cut into both the spindle and the spindle collet. That lets you make fine seating-depth adjustments by turning the spindle, or quickly zip it up and down for larger moves. It locks positively to prevent slippage and makes tightening the spindle lock far easier on your hands.





Reviews
There are no reviews yet.