Description
If you shoot .41 Remington Magnum, you already know factory ammo can be scarce and pricey, which makes rolling your own a smart move. This Hornady Custom Grade New Dimension 3-die set gives you everything needed to turn once-fired brass into accurate, repeatable handgun loads. It covers both .41 Remington Magnum and .41 Action Express, and the whole set is machined, hand-inspected, and polished to a smooth internal finish that treats your brass right.
What You Get in the 41 Magnum Nitride 3-Die Set
The set includes a full-length sizing die, a case mouth expander die, and a seating die with a built-in roll crimp. The sizing die uses a titanium nitride sizing ring, which is the real standout here. That coating lets you size cases without case lube and keeps brass from sticking, so you spend less time wiping down cases and more time cranking out rounds. The seating die features a floating bullet alignment sleeve that pre-aligns the bullet and case before seating, giving you straighter ammo with less runout.
Why the Zip Spindle Matters on This Hornady Die Set
Hornady's Zip Spindle design is a feature reloaders tend to appreciate once they use it. A series of light threads cut into the spindle and collet lets you make fine, incremental adjustments to the decapping assembly, or quickly zip it up and down for bigger changes, all without fighting a stubborn spindle lock. It stays put once set, which keeps your decapping pin and expander where you want them.
The dies thread into any standard 7/8-14 press, and the set ships in a reusable plastic storage box with Sure-Loc rings so your adjustments stay dialed in between sessions. Keep in mind the shell holder is sold separately, so grab the correct one for the .41 case head if you don't already have it. For the serious .41 Mag handloader, this is a set built to run for years.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546539
- UPC: 090255565393
- Caliber: .41 Remington Magnum / .41 Action Express
- Bullet Diameter: .410
- Series: Custom Grade New Dimension
- Number of Dies: 3
- Set Includes: Full-Length Sizing Die, Case Mouth Expander Die, Seating Die
- Sizing Ring: Titanium Nitride (no case lube required)
- Spindle: Zip Spindle non-slip design
- Crimp Type: Roll crimp
- Thread Size: 7/8-14
- Made In: USA
- Shipping Weight: 1.65 lbs
What’s Included
- Full-length nitride sizing die
- Case mouth expander die
- Seating die with roll crimp
- Sure-Loc lock rings
- Plastic storage box
- Instruction sheet
Frequently Asked Questions
Does the Hornady 41 Magnum Nitride 3-Die Set require case lubrication?
No, the sizing die uses a titanium nitride sizing ring that lets you size .41 Mag brass without case lube. The coating also helps keep cases from sticking in the die. Some reloaders still run a light lube just because it makes the press cycle a little smoother, but it isn't necessary.
Is a shell holder included with this die set?
No, the shell holder is sold separately. You'll want the shell holder that fits the .41 Remington Magnum case head before you start loading. If you already load other large-rim cartridges, check whether your existing holder matches first.
Will these dies work in any standard reloading press?
Yes, the dies use the common 7/8-14 thread and will thread into any standard single-stage, turret, or progressive press. That makes this set an easy drop-in for just about any setup you already own.
Can this set load both .41 Remington Magnum and .41 Action Express?
Yes, the set is set up for both the .41 Remington Magnum and .41 Action Express, since they share the .410 bullet diameter. Just note the two cartridges have different case lengths and pressures, so follow published load data for whichever one you're loading.





Reviews
There are no reviews yet.