Description
If you're loading for the .32 family of revolver cartridges, this Hornady New Dimension set covers a surprising amount of ground. The three dies work with .32 S&W Long, .32 H&R Magnum, and .327 Federal brass sized to the .311/.312 bullet diameter, so one set handles a lineup of cartridges that use the same case head and bullet. The set includes a full-length sizing die, a case mouth expander, and a bullet seating die with a built-in crimp, which is everything you need to take fired brass back to a finished round.
What Makes the Hornady .32 Die Set Tick
The heart of this set is the Zip-Spindle design. The decapping spindle uses a series of light threads that lock together to stop the slippage that drives reloaders crazy during setup. You can zip the spindle up or down for big moves or fine-tune it in small increments, then lock it down so it stays put load after load. Each die body is precision machined and polished to a smooth internal finish, which cuts down on friction and keeps cases from sticking as they move in and out.
Built to Outlast Your Reloading Bench
Hornady builds these from select steel that's heat-treated for durability, and every part gets hand inspected before it ever leaves the factory. The seating die uses a floating alignment sleeve to keep the bullet straight as it seats, which pays off in better concentricity and more consistent rounds on paper. The Sure-Loc lock rings clamp around the full die body and apply constant pressure across the threads, so your settings don't wander once you've dialed them in.
Getting Started with the .32 S&W Long Die Set
These are standard 7/8-14 thread dies, so they'll thread into any press that takes common dies, including single-stage and turret setups. Keep in mind the shell holder is sold separately and matched to the cartridge, so grab the correct one for your brass before your first session. Everything arrives in a compartmented storage box that keeps the dies, rings, and accessories organized on the shelf. The whole set is covered by Hornady's no-risk lifetime warranty.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546509
- UPC: 090255565096
- Series: New Dimension Custom Grade
- Type: 3-Die Set
- Cartridge: .32 S&W Long / .32 H&R Magnum / .327 Federal
- Bullet Diameter: .311 / .312
- Gun Type: Pistol / Revolver
- Dies Included: Sizer, Expander, Seater
- Thread: 7/8-14
- Spindle System: Zip-Spindle
- Lock Rings: Sure-Loc
- Warranty: No-Risk Lifetime Warranty
What’s Included
- Full-length sizing die with Zip-Spindle and decapping assembly
- Case mouth expander die
- Bullet seating die with crimp
- Sure-Loc lock rings
- Compartmented die storage box
Frequently Asked Questions
What cartridges will this Hornady .32 die set load?
This set is set up for the .32 revolver family that shares the same case head and .311/.312 bullet diameter. That covers .32 S&W Long, .32 H&R Magnum, and .327 Federal. One set gives you a lot of flexibility across those rounds.
Does the die set come with a shell holder?
No, the shell holder is sold separately and needs to match your cartridge. Pick up the correct Hornady shell holder for your .32 brass before your first loading session so you're ready to go.
Will these dies fit my press?
Yes, these use the standard 7/8-14 thread that works with any press designed to accept common reloading dies. That includes single-stage, turret, and most progressive presses. Just thread them in and dial them to your shell holder.
What is the Zip-Spindle feature on the Hornady New Dimension dies?
The Zip-Spindle is Hornady's non-slip decapping spindle design. It uses light threads that lock together so the spindle doesn't slip while you're setting up the die. You can make quick large adjustments or fine incremental ones, then lock it in place.




Reviews
There are no reviews yet.