Description
Loading for the 375 Flanged Magnum Nitro Express means you're working with a rimmed British classic, the double rifle companion to the 375 H&H Magnum that Holland & Holland rolled out back in 1912. Factory ammo for this one is scarce and pricey, so a proper die set isn't a luxury here, it's how you keep your rifle fed. Hornady's Series IV covers the specialty and vintage calibers that the mainstream sets skip, and this two-die set is cut specifically for that 0.375 caliber rimmed case.
What You Get in the Series IV 375 Flanged Magnum Set
This is a two-die arrangement: a full-length sizing die and an in-line bullet seating die. The sizer brings your fired brass back to spec and handles depriming in one pass, while the seater aligns the bullet with the case neck before it ever enters the die for straight, repeatable seating. Both are machined from steel, hand-inspected, and finished to that mirror-smooth internal polish Hornady is known for, which keeps cases moving without sticking.
Features Behind the 375 Flanged Mag Nitro Express Dies
The sizing die uses Hornady's Zip Spindle design that locks positively to eliminate slippage when you adjust the decapping assembly. You also get the elliptical expander, which runs smoother than a traditional ball expander and cuts down on neck stretch and friction as the case comes off the stem. Both dies wear Hornady's Sure-Loc lock rings that clamp around the full body of the die, so your settings stay put and the locking screw never chews up the threads.
Fit and Setup
These are standard 7/8-14 thread dies, so they thread right into any press built to accept common dies. The set ships in a stackable storage box that keeps your adjusted dies and shell holder organized on the bench. For anyone running a double rifle or single shot in this old-world chambering, having purpose-cut dies on hand takes the headache out of keeping the gun in ammunition.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546449
- UPC: 090255564495
- Product Type: 2-Die Set
- Die Series: Series IV (Custom Grade)
- Caliber: 375 Flanged Mag Nitro Express
- Bullet Diameter: 0.375 in
- Dies in Set: 2 (Full-Length Sizer, Bullet Seater)
- Thread: 7/8-14
- Material: Steel
- Lock Ring: Sure-Loc with wrench flats
- Expander: Elliptical expander
What’s Included
- Full-length sizing die
- In-line bullet seating die
- Sure-Loc lock rings
- Elliptical expander
- Headed decap pin
- Stackable storage box
Frequently Asked Questions
What dies come in the Series IV 375 Flanged Mag Nitro Express set?
This is a two-die set that includes a full-length sizing die and an in-line bullet seating die. The sizer resizes your fired brass and deprimes it in one stroke, while the seater handles bullet seating with straight alignment. Both dies arrive with Sure-Loc lock rings and ship in a stackable storage box.
Will these dies fit my reloading press?
Yes. These are standard 7/8-14 thread dies, which is the common thread size used across the industry. They'll thread into any single-stage or progressive press built to accept standard dies.
Is the 375 Flanged Mag Nitro Express the same as the 375 H&H Magnum?
They're closely related but not the same. The 375 Flanged Magnum Nitro Express is the rimmed version Holland & Holland designed for double rifles and single shots, while the 375 H&H Magnum uses a belted case built for bolt action feeding. Both fire the same 0.375 caliber bullet, but the cases are not interchangeable, so make sure your dies match your chambering.
What is the elliptical expander and why does it matter?
The elliptical expander is a Hornady design that runs smoother than a traditional ball expander as the case comes off the stem. It reduces friction and cuts down on case neck stretch, which helps extend brass life. That's a real plus when you're loading a cartridge with hard-to-find brass like this one.



Reviews
There are no reviews yet.