Description
The .33 Nosler is a big, fast .338 with plenty of case capacity, and feeding it quality factory ammo adds up quick. These Hornady Custom Grade Series IV dies let you take the reins on your own loads, and they're the same proven design that's earned Hornady a reputation on reloading benches for years. The set covers the two jobs that matter most for a bottleneck rifle round: resizing fired brass back to spec and seating bullets straight and true.
What the Series IV .33 Nosler Dies Bring to the Bench
The full-length sizing die brings cases back to SAAMI minimum dimensions so they chamber cleanly every time, which matters a lot with the rebated-rim Nosler case family. Inside, Hornady's Elliptical Expander replaces the old-style ball expander for smoother neck sizing and less friction and case neck stretch. You also get Hornady's Zip Spindle, which lets you make small threaded adjustments to the decapping assembly or zip it up and down for bigger moves, then lock it down so it won't slip. A sturdy headed decapping pin knocks out spent primers without fuss.
Dialing In Your .33 Nosler Handloads
The seating die aligns the bullet in the sleeve as it enters, which keeps runout low and helps your groups tighten up. Sure-Loc lock rings clamp around the full die body for constant pressure across the threads, so your settings hold once you've got them where you want them. The locking retainer spring pops out in seconds when it's time to clean or swap the spindle, so maintenance is painless.
Built From Hand-Inspected Steel
Every Hornady die is machined from heat-treated steel, then hand-inspected before it leaves the shop. The internal profile is polished smooth so cases glide without sticking. Keep in mind the .33 Nosler uses a Hornady #5 shell holder, which is sold separately and worth grabbing if you don't already have one on hand.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546381
- UPC: 090255563818
- Caliber: .33 Nosler
- Product Type: 2-Die Set (Sizing/Seater)
- Series: Custom Grade Series IV
- Gun Type: Rifle
- Construction: Heat-treated, hand-inspected steel
- Spindle: Zip Spindle
- Expander: Elliptical Expander
- Lock Rings: Sure-Loc with wrench flats
- Compatible Shell Holder: Hornady #5 (sold separately)
- Shipping Weight: 1.365 lbs
What’s Included
- Full-length sizing die
- Bullet seating die
- Elliptical Expander
- Headed decapping pin
- Zip Spindle
- Two Sure-Loc lock rings
- Plastic storage box
- Instruction literature
Frequently Asked Questions
Does this .33 Nosler die set come with a shell holder?
No, a shell holder is not included in this set. The .33 Nosler uses a Hornady #5 shell holder, which you'll need to pick up separately if you don't already own one. Its rebated-rim case needs the correct holder to position brass properly in the press.
Can the Series IV seating die crimp cases?
The Hornady Custom Grade seating die includes the option to apply a crimp if you choose to. For most bolt-gun .33 Nosler loads, many handloaders skip the crimp and rely on neck tension, but the ability is there when you want it.
What does the Zip Spindle do on these dies?
The Zip Spindle lets you make fine threaded adjustments to the decapping and expander assembly, or zip it up and down quickly for larger moves. Once it's set, it locks securely so it won't slip during resizing. It's a nice touch that makes dialing in the sizing die easier.
Is this a full-length sizing die or a neck sizing die?
This set uses a full-length sizing die that brings fired brass back to SAAMI minimum specifications. Full-length sizing is the way to go with the .33 Nosler for reliable chambering, especially since the rebated-rim case headspaces on the shoulder. The Elliptical Expander handles the neck for smooth, consistent tension.



Reviews
There are no reviews yet.