0
0

Hornady Series I Two-Die Set .300 WSM Full Length Rifle Dies

UPC: 090255563696

$49.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Loading your own .300 WSM is one of the best ways to dial in a short magnum that shoots exactly the way you want it to, and this Hornady Series I two-die set is where a lot of handloaders start. It's a Custom Grade full-length setup that covers the two jobs you need most: resizing fired brass back to spec and seating your bullets with consistency. The internal surfaces are precision machined and hand polished to a smooth mirror finish, which keeps cases from sticking and helps your brass last through more loading cycles.

What Sets the .300 WSM Series I Die Set Apart

The full-length sizing die uses Hornady's Zip Spindle design, a clever bit of engineering with light threads cut into both the spindle and the collet. You can turn it for fine, incremental tweaks or zip it up and down quickly for bigger changes, then lock it down so it never slips mid-session. The elliptical expander is a Hornady favorite for good reason since it reduces friction and case neck stretch far better than the old ball-style expanders, and it makes necking brass up a smoother job. A hardened steel decapping pin handles depriming without bending or breaking, even on cases with crimped primer pockets.

Seating and Setup With the Hornady Two-Die Set

The seating die aligns the bullet with the case neck as it enters the die body for straight, repeatable seating, and it includes a built-in roll crimp if you want to lock that bullet in place without buying a separate crimp die. Sure-Loc lock rings clamp evenly around each die with wrench flats and a locking screw that never bites into the threads, so your zero holds every time you thread a die back into the press.

These dies use the standard 7/8-14 thread and work with virtually any single stage or turret press on the market. The set ships in a compartmentalized plastic storage box to keep everything organized on the bench. Keep in mind a shell holder is not part of this set, so you'll want to grab the correct one for the .300 WSM case head separately if you don't already have it.

Key Specifications

  • Caliber: .300 Winchester Short Magnum (WSM)
  • Die Set Type: Series I Custom Grade Full Length Two-Die Set
  • Number of Dies: 2 (Full-Length Sizing Die, Bullet Seating Die)
  • Thread Size: 7/8-14
  • Spindle System: Zip Spindle
  • Expander: Elliptical Expander
  • Seating Die Crimp: Built-in roll crimp
  • Lock Rings: Sure-Loc lock rings with wrench flats
  • Storage: Compartmentalized plastic storage box
  • Shell Holder Included: No
  • Manufacturer: Hornady
  • Manufacturer Part Number: 546369
  • UPC: 090255563696
  • Shipping Weight: 1.35 lbs

What’s Included

  • Full-length sizing die
  • Bullet seating die
  • Sure-Loc lock rings
  • Plastic storage box

Frequently Asked Questions

Does the Hornady .300 WSM Series I die set come with a shell holder?

No, a shell holder is not included with this set. You'll need to pick up the correct shell holder for the .300 WSM case head separately. If you already reload other cartridges that share the same case head diameter, there's a good chance the shell holder you have will work.

Will this two-die set work with my reloading press?

Yes. The dies use the industry-standard 7/8-14 thread, so they'll thread right into virtually any single stage, turret, or progressive press on the market. That makes this a safe pick no matter which brand of press sits on your bench.

What is the Zip Spindle feature on the sizing die?

The Zip Spindle uses a series of light threads cut into both the spindle and the collet. You can turn it for fine, incremental adjustments or zip it up and down quickly for larger movements, then lock it in place to eliminate slippage. It makes dialing in your sizing setup faster and keeps those settings from drifting.

Do I need a separate crimp die with the Hornady .300 WSM seating die?

Not necessarily. The seating die includes a built-in roll crimp, so you can seat and crimp in one step if your load calls for it. If you prefer to crimp separately or want a different crimp style, you can always add a dedicated crimp die later.

Additional information

UPC

090255563696

Manufacturer

Manufacturer Part Number

546369

Shipping Weight

1.35

Reviews

There are no reviews yet.

Be the first to review “Hornady Series I Two-Die Set .300 WSM Full Length Rifle Dies”