Description
If you shoot a lot of .30-06 Springfield, you already know factory ammo adds up fast. This Hornady Custom Grade Series I two-die set is the starting point for rolling your own, giving you a full-length sizing die and a bullet seating die machined to the tight tolerances Hornady built its name on. Series I covers the most popular bottleneck rifle cartridges, and the '06 is right in that wheelhouse.
What the Hornady Series I 30-06 Set Brings to the Bench
The sizing die uses Hornady's Zip Spindle design, which puts a series of light threads on both the spindle and collet. That means you can dial in small decapping pin and expander adjustments by turning the spindle, or zip it up and down quickly for bigger moves without fighting a stuck lock. The elliptical expander is a nice touch too, running smoother through the case neck than old-school ball expanders and cutting down on neck stretch and friction.
The seating die runs Hornady's in-line system, which lines up the bullet, case neck, and seating stem inside the sleeve before the bullet ever touches the neck. That alignment is what keeps your seated rounds straight and consistent, which is exactly what you want chasing accuracy out of a '06. There's also a built-in crimper, so you can crimp without buying a separate die and giving up a station on your press.
Built to Outlast the Rifle
Hornady's Custom Grade dies are cut from select, heat-treated steel with one of the smoothest internal finishes in the business, so cases glide in and out without sticking. They're guaranteed never to break or wear out from normal use, and if one ever does, Hornady repairs or replaces it at no cost. The set ships in a compartmentalized storage box with Sure-Loc lock rings that clamp around the full die body for a solid, repeatable setting. Worth noting: the shell holder is sold separately, so grab the correct one for the '06 if you don't have it already.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546340
- UPC: 090255563405
- Caliber: .30-06 Springfield
- Product Type: Full Length Die Set
- Series: Series I Custom Grade
- Dies in Set: 2 (Sizing / Seating)
- Spindle Design: Zip Spindle
- Expander: Elliptical Expander
- Lock Rings: Sure-Loc with Wrench Flats
- Crimp: Built-in Crimper
- Shipping Weight: 1.4 lbs
What’s Included
- Full-length sizing die
- Bullet seating die with elliptical expander
- Sure-Loc lock rings
- Compartmentalized storage box
Frequently Asked Questions
Does the Hornady 30-06 Series I set come with a shell holder?
No, the shell holder is sold separately. You'll need to pick up the correct shell holder for the .30-06 Springfield case head if you don't already have one on hand. It's a cheap add-on and lets you get loading right away.
What dies are in this two-die set?
You get a full-length sizing die and a bullet seating die. The sizer resizes the whole case back to spec and deprimes it, while the seater sets your bullet to depth. The seating die also has a built-in crimper if you want to crimp without a separate die.
Is this Hornady die set good for bolt-action and semi-auto 30-06 rifles?
Yes. Because it's a full-length set, it resizes the entire case body, which is the right choice for reliable feeding in semi-autos and for rounds that get swapped between different rifles. Full-length sizing works fine for bolt guns too, so it's a solid all-around choice for the '06.
Will these dies work on any standard reloading press?
They use standard 7/8-14 threads, so they thread into just about any common single-stage or progressive press. The Zip Spindle makes setting decap depth and expander position easy, and the Sure-Loc rings lock your settings in place once you've got everything dialed.





Reviews
There are no reviews yet.