Description
The .220 Swift has earned its reputation as one of the fastest factory varmint cartridges ever made, and getting the most out of it means loading your own. This Hornady Custom Grade Series I 2-Die Set gives you the two dies that matter most for that job: a full-length sizer and a bullet seater, both machined and polished to the tight tolerances Hornady built its name on. Series I covers the most popular bottleneck rifle cartridges, and the .220 Swift fits right in that wheelhouse.
What Sets the Hornady 546222 Sizing Die Apart
The full-length sizer brings fired brass back down to spec and features Hornady's Zip Spindle design. A series of light threads cut into the spindle and collet lets you make fine adjustments by turning the spindle or zip it up and down quickly for bigger moves, and it locks positively so there's no slippage when you set your headspace. An elliptical expander handles the neck, running smoother than old-style ball expanders and cutting down on friction and case neck stretch. A headed decapping pin knocks out spent primers in the same stroke.
Seating Bullets with the .220 Swift Die Set
The seater die uses a sliding alignment sleeve that holds the bullet, case neck, and seating stem in line before the bullet ever starts into the case. That pre-alignment is what gives you straight, consistent seating depth round after round, which translates directly to tighter groups downrange where the Swift really shines. Sure-Loc lock rings clamp around the full body of each die to hold your settings put.
A Die Set Built to Outlast Your Rifle
Hornady backs these with a guarantee against breakage or wear from normal use, so this is a buy-it-once setup. The dies ship in a stackable storage box that keeps them organized and has room for a shell holder and Lock-N-Load bushings if you run them. Pick up the correct .220 Swift shell holder separately and you're ready to run brass.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546222
- UPC: 090255562224
- Series: Custom Grade Series I
- Caliber: .220 Swift
- Bullet Diameter: 0.224 in
- Product Type: Full Length Die Set
- Dies In Set: 2 (sizer and seater)
- Die Type: Sizing / Seater
- Material: Steel
- Sizer Features: Zip Spindle, elliptical expander, headed decap pin
- Lock Rings: Sure-Loc with wrench flats
What’s Included
- Full Length Sizing Die
- Bullet Seating Die
- Elliptical Expander
- Headed Decapping Pin
- Zip Spindle
- Sure-Loc Lock Rings
- Stackable storage box
Frequently Asked Questions
Does the Hornady 546222 die set include a shell holder?
No, a shell holder is not included with this set. You'll need to pick up the correct shell holder for the .220 Swift case head separately. The dies do ship in a storage box that has room to keep that shell holder organized once you have it.
What dies come in this .220 Swift 2-die set?
The set includes a full-length sizing die and a bullet seating die. The sizer brings fired brass back to spec and decaps in the same stroke, while the seater sets your bullet to a consistent depth. That covers the core steps for loading bottleneck rifle brass like the .220 Swift.
What is the Zip Spindle on the Hornady sizing die?
The Zip Spindle is Hornady's decapping and expander spindle design found on their full-length size dies. Light threads cut into the spindle and collet let you make fine adjustments by turning it or zip it up and down quickly for larger moves, and it locks positively to prevent slippage. That makes dialing in your headspace a lot easier and more repeatable.
Will these dies wear out over time?
Hornady backs its Custom Grade dies with a guarantee against breakage or wear from normal use. The internals are precision machined and polished to a smooth finish, which keeps cases running through without sticking. With reasonable care these are a one-time purchase for your .220 Swift reloading bench.




Reviews
There are no reviews yet.