0
0

Hornady Series I Custom Grade 2-Die Set .22-250 Rem (546220)

UPC: 090255562200

$49.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload the .22-250 Remington, this Hornady Series I Custom Grade 2-Die Set covers the two jobs that matter most at the bench: full-length sizing and seating. The set pairs a full-length size die that brings fired brass back to spec with a seating die that aligns the bullet and case neck before the bullet ever enters the case. The result is cleaner, more consistent ammo without a lot of fuss in the process.

What Sets This Hornady .22-250 Die Set Apart

The full-length size die uses Hornady's Zip-Spindle design, where light threads cut into the spindle and collet lock the decapping assembly in place to stop slippage and let you dial in fine adjustments. Instead of a traditional ball expander, you get an elliptical expander that glides through the case neck, cutting down on friction and neck stretch for longer case life. The internal profile is hand-polished to a smooth finish, so cases feed through without sticking or dragging.

Seating and Crimping With the Series I Set

The seater die runs a floating alignment sleeve that guides the bullet and case neck into perfect alignment before seating starts, which is where a lot of the accuracy gains come from. It also has a built-in crimper, so you can roll a crimp right in the seating step and save a station on your press if your load calls for it. A locking retainer spring near the base of the die pops out in seconds when it's time to clean or disassemble.

Built to Last on the .22-250 Remington Bench

Hornady machines these dies from select heat-treated steel and hand-inspects every part before assembly. They come packaged in a compartmented storage box with two Sure-Loc lock rings that clamp around the full die body, applying even pressure so the locking screws never touch the threads. The whole set is backed by Hornady's lifetime no-risk warranty, which tells you how they feel about the build.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 546220
  • UPC: 090255562200
  • Caliber: .22-250 Remington (.224)
  • Product Type: Full Length 2-Die Set
  • Series: Series I Custom Grade New Dimension
  • Dies Included: Full-Length Size Die, Seater Die
  • Expander Type: Elliptical Expander
  • Spindle Design: Zip-Spindle
  • Lock Rings: Sure-Loc with Wrench Flats
  • Crimper: Built-in roll crimp in seater die
  • Warranty: Lifetime No-Risk Warranty
  • Shipping Weight: 1.35 lbs

What’s Included

  • Full-Length Size Die with Zip-Spindle and elliptical expander
  • Bullet Seater Die with built-in crimper
  • Two Sure-Loc lock rings with wrench flats
  • Allen wrench for lock rings
  • Compartmented die storage box

Frequently Asked Questions

Does the Hornady .22-250 die set include a shell holder?

No, a shell holder is not included with this set. You'll want to pair it with a Hornady #1 shell holder for the .22-250 Remington. Shell holders are sold separately since many reloaders already have the one they need on hand.

Can I crimp with this Series I 2-die set, or do I need a separate crimp die?

The seater die has a built-in crimper, so you can apply a roll crimp during the seating step without buying a dedicated crimp die. That saves a station on your press. For most .22-250 loads a crimp isn't required, but the option is there if your load benefits from it.

What is the Zip-Spindle design on the sizing die?

The Zip-Spindle uses light threads cut into the spindle and collet that lock the decapping assembly firmly in place. This stops the spindle from slipping and lets you make fine, repeatable adjustments. The wrench flats also let you snug it down without pliers damaging the threads.

Will these dies work on a Hornady Lock-N-Load press?

Yes, they thread into standard 7/8-14 die stations like you'll find on any common single-stage or progressive press. If you want to run them in a Lock-N-Load quick-change system, you'll need the Lock-N-Load die bushings, which are sold separately. Without the bushings they still thread in and lock down the conventional way.

Additional information

UPC

090255562200

Manufacturer

Manufacturer Part Number

546220

Caliber/Gauge

.22-250 Remington

Length

7.5000

Product Type

FULL LENGTH

Shipping Weight

1.35

Reviews

There are no reviews yet.

Be the first to review “Hornady Series I Custom Grade 2-Die Set .22-250 Rem (546220)”

Related Products