0
0

Hornady 224 Valkyrie Series I Full-Length 2-Die Set (546211)

UPC: 090255562118

$48.99

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading .224 Valkyrie for your AR or bolt gun, this Hornady Custom Grade Series I set gives you the two dies that do the heavy lifting: a full-length sizer and a bullet seater, both machined to Hornady's long-standing standards. The sizer brings fired brass back to SAAMI minimum spec so your rounds chamber cleanly, while the seater sets your bullets straight and to the depth you want. It's a no-nonsense setup that handloaders have trusted across dozens of cartridges, now cut for the Valkyrie.

What Sets the 224 Valkyrie Series I Set Apart

The full-length size die carries Hornady's Zip Spindle design, which uses a series of light threads on the spindle and collet. That means no more slipping when you lock things down, and you can make small, precise adjustments by turning the spindle or run it up and down quickly for bigger moves. Paired with the elliptical expander, you get smooth neck sizing with less friction and less case neck stretch than you'd see from an old-style ball expander. A hardened steel headed decapping pin handles depriming without bending or breaking, even on crimped primer pockets.

Why Handloaders Reach for This 224 Valkyrie Die Set

The .224 Valkyrie was built to stretch the .22-caliber envelope out past long range, so consistency in your brass prep matters more than usual. These dies include Sure-Loc lock rings that clamp around the full circumference to hold your settings without the screw ever touching the threads, and the whole set tucks into a stackable storage box that keeps your components organized between sessions. The locking retainer spring pops off in seconds when it's time to clean or swap parts.

Keep in mind a shell holder is sold separately for this set, so if you don't already have the right one on your bench you'll want to grab it alongside the dies. Hornady backs these with a lifetime guarantee against breakage or wear from normal use, which tells you plenty about how long they expect them to last on your press.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 546211
  • UPC: 090255562118
  • Model: Custom Grade
  • Caliber: .224 Valkyrie
  • Bullet Diameter: .224
  • Die Series: Series I
  • Die Type: Full-Length Sizing / Bullet Seating
  • Number of Dies: 2
  • Sizing Spec: SAAMI minimum
  • Spindle Design: Zip Spindle
  • Expander Type: Elliptical Expander
  • Length: 7.6 in
  • Shipping Weight: 1.41 lbs

What’s Included

  • Full-Length Size Die with Sure-Loc lock ring
  • Bullet Seating Die with Sure-Loc lock ring
  • Elliptical Expander
  • Headed decapping pin(s)
  • Zip Spindle
  • Stackable die storage box

Frequently Asked Questions

Does the 224 Valkyrie Series I die set come with a shell holder?

No, a shell holder is sold separately for this set. You'll need the correct holder to fit the .224 Valkyrie case head before you start sizing. If your bench isn't already stocked with it, pick one up at the same time so you're ready to load right out of the box.

What does the full-length sizer do compared to a neck sizer?

The full-length size die works the entire case body and neck back down to SAAMI minimum spec, which keeps your rounds chambering reliably in semi-autos and bolt guns alike. It also sets your shoulder bump so headspace stays right for your rifle. For AR-pattern .224 Valkyrie builds, full-length sizing is generally the safer call for consistent feeding.

What is the Zip Spindle and why does it matter on this die set?

The Zip Spindle uses light threads cut into the spindle and collet so the decapping assembly locks down without slipping. You can turn the spindle for fine, incremental adjustments or run it up and down quickly for larger moves. It takes the knuckle-busting out of tightening the spindle lock while keeping your settings put.

Will these dies work with my Hornady Lock-N-Load press?

Yes, the standard 7/8-14 threaded dies thread into any common single-stage or progressive press. If you're running Hornady's Lock-N-Load bushing system, you'll want the matching die bushings to take advantage of the quick-change feature. The included Sure-Loc lock rings hold your settings whether you bush them or not.

Additional information

UPC

090255562118

Manufacturer

Manufacturer Part Number

546211

Caliber/Gauge

.224 Valkyrie

Length

7.6000

Product Type

2-Die Set

Shipping Weight

1.41

Reviews

There are no reviews yet.

Be the first to review “Hornady 224 Valkyrie Series I Full-Length 2-Die Set (546211)”