Description
Loading the .338 Lapua Magnum right means paying attention to the details, and this Hornady Match Grade set is built for people who want that kind of control. It gives you precise say over neck tension during resizing by using interchangeable, self-centering neck size bushings, which keeps you from over-working your brass and helps it last through more loading cycles. Tight tolerances at the press are what turn into tighter groups downrange, and that's really the whole point of a match set like this.
What Sets the Match Grade .338 Lapua Set Apart
The full-length sizing die runs a free-floating, self-centering spindle for concentric neck expansion, along with a precision-polished elliptical expander that cuts friction and case-neck stretch. It also ships with a replaceable headed decap pin and a decap pin retainer, so you can set it up the way you prefer. The bushing design lets you fine-tune neck tension by swapping bushings rather than being locked into one spec.
Dialing In Seating Depth
The seating die is where this set earns its keep. It now comes with the Click-Adjust Bullet Seating Micrometer factory installed, a feature Hornady made standard across the Match Grade seating dies starting in 2025. You get audible, tactile .001 inch clicks for seating depth adjustments, plus a floating alignment sleeve that pre-aligns the bullet and case before seating happens. For a cartridge as long-legged as the .338 Lapua, that repeatability makes a real difference when you're chasing consistency load to load.
A Couple Things to Know Before You Order
These dies use a separate, cartridge-specific neck size bushing that is not included in the box, so you'll want to pick up the right bushing for your brass to complete the setup. The shellholder is also sold separately. The set uses standard 7/8 inch-14 threads, so it drops into just about any common reloading press.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 545178
- UPC: 090255551785
- Caliber: .338 Lapua Magnum
- Number of Dies: 2
- Die Type: Full-Length Bushing Sizing Die, Bullet Seating Die
- Seating Adjustment: Factory-Installed Click-Adjust Micrometer (.001" increments)
- Thread Size: 7/8"-14
- Storage Box Included: Yes
- Bushing Included: No (sold separately)
- Shellholder Included: No (sold separately)
- Origin: Made in USA
- Shipping Weight: 1.839 lbs
What’s Included
- Full-length bushing style sizing die
- In-line bullet seating die with factory-installed Click-Adjust Micrometer
- Precision-polished elliptical expander
- Replaceable decap pin and decap pin retainer
- Standard bullet seating stem
- Two Sure-Loc lock rings
- Plastic die storage box
Frequently Asked Questions
Does the Hornady Match Grade .338 Lapua die set come with a neck size bushing?
No, the neck size bushing is sold separately and is not included in the box. Hornady designs these dies to use interchangeable, cartridge-specific bushings so you can tune neck tension to your brass. You'll want to select the correct bushing diameter for your .338 Lapua Magnum setup to complete the die.
What does the Click-Adjust Micrometer on the seating die do?
It lets you adjust bullet seating depth in precise .001 inch increments with audible, tactile clicks, so you can return to a setting or make small changes without guesswork. Starting in 2025 this micrometer comes factory installed on Hornady Match Grade seating dies. For long-range .338 Lapua loads, that repeatability helps keep your seating depth consistent round to round.
Will this die set fit my reloading press?
Yes, the set uses standard 7/8 inch-14 threads, which is the common standard for most reloading presses on the market. Keep in mind the .338 Lapua Magnum is a large cartridge, so your press needs to be rated to handle magnum-length cases. A sturdy single-stage press is a good match for this kind of precision loading.
Is a shellholder included with the set?
No, the shellholder is sold separately and is not part of this die set. You'll need the correct shellholder sized for the .338 Lapua Magnum case head to use the dies on your press. It's an easy add-on to grab at the same time so you're ready to load right away.




Reviews
There are no reviews yet.