0
0

Hornady Match Grade .300 Win Mag 2-Die Set with Click-Adjust Micrometer

UPC: 090255551631

$165.99

18 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading .300 Win Mag for long-range work and you want repeatable results round after round, Hornady's Match Grade 2-die set gives you the kind of control that shows up on paper. This is a full-length bushing-style setup built around two ideas that precision handloaders care about most: dialing in exactly how much your case necks get sized, and seating bullets to a depth you can return to every single time.

What Sets the Match Grade .300 Win Mag Dies Apart

Instead of a fixed neck diameter, the sizing die uses interchangeable, self-centering neck bushings that float inside the die body. That float lets the bushing align itself on the case neck for straighter sizing and less runout. Because you pick the bushing diameter, you're not forced to oversize and then pull the neck back open with an expander, which is what overworks brass and shortens case life. Worth knowing up front: the neck bushing is sold separately, so you'll want to grab the right size for your brass. A good starting point is measuring the neck of a loaded round and subtracting around .002 for neck tension, then picking the matching bushing.

Seating Depth You Can Actually Repeat

The real headliner here is the seating die. It comes with the Click-Adjust Bullet Seating Micrometer, which Hornady made standard across the Match Grade seating dies. Each click moves seating depth in .001 inch increments, and you feel every one of them, so chasing the lands or tuning a load off the lands becomes a precise, repeatable process rather than guesswork. The in-line seating design also keeps the bullet aligned with the case for consistent concentricity.

Built Around the .308 Bullet Family

This set is cut for the .300 Winchester Magnum and the .308 diameter bullets it runs, and it ships with both a standard seating stem and a custom ELD Match seating stem so you can seat sleek match bullets without deforming the tip. If you shoot a magnum that rewards careful brass prep and tight tolerances, this is the die set that lets your loading bench keep up with your rifle.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 545163
  • UPC: 090255551631
  • Caliber: .300 Winchester Magnum
  • Bullet Diameter: .308
  • Die Type: Full-Length Bushing Sizing and Bullet Seating
  • Dies in Set: 2
  • Seating Adjustment: Click-Adjust Micrometer, .001 inch increments
  • Shell Holder: #5
  • Color: Silver
  • Material: Steel
  • Country of Origin: United States
  • Shipping Weight: 1.836 lbs

What’s Included

  • Full-length bushing-style sizing die
  • In-line bullet seating die with Click-Adjust seating micrometer
  • Standard bullet seating stem
  • Custom ELD Match bullet seating stem
  • Elliptical expander
  • Decap pin retainer
  • #5 shell holder cap

Frequently Asked Questions

Does the Hornady Match Grade .300 Win Mag die set come with a neck bushing?

No, the neck bushing is sold separately. Hornady builds these dies to accept interchangeable, self-centering bushings so you can choose the exact neck tension your brass and load need. You'll want to pick up at least one bushing in the correct diameter before you start sizing.

How do I know which bushing size to get for my .300 Win Mag brass?

The simplest method is to measure the neck diameter of a loaded round with calipers, then subtract about .002 to .003 inches for neck tension and buy the bushing closest to that number. Hornady bushings are available in .001 inch increments. Many reloaders keep a size above and below their target on hand, since brass can spring back differently depending on the maker and thickness.

What does the Click-Adjust Bullet Seating Micrometer do?

It lets you set and return to a precise seating depth using tactile clicks, with each click moving the bullet in .001 inch increments. That makes it easy to tune your distance off the lands and get repeatable overall length from one loading session to the next. Hornady made this micrometer standard on their Match Grade seating dies.

Will this die set work with standard reloading presses?

Yes, these are standard 7/8-14 threaded dies that thread into any common single-stage or progressive press. The set includes a #5 shell holder cap, and you'll use a shell holder matched to the .300 Win Mag case head. It's a straightforward swap into the press you already own.

Additional information

UPC

090255551631

Manufacturer

Manufacturer Part Number

545163

Caliber/Gauge

.300 Winchester Magnum

Shipping Weight

1.836

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade .300 Win Mag 2-Die Set with Click-Adjust Micrometer”