0
0

Hornady 545154 Match Grade .308 Win Die Set w/ Micrometer

UPC: 090255551549

$165.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading .308 Win or 7.62 NATO and chasing tighter groups, this Hornady Match Grade set gives you a lot more control than a standard die set. It's a full-length, two-die arrangement built around interchangeable, self-centering neck size bushings, which means you pick your exact neck tension instead of accepting whatever a fixed die gives you. That bushing system keeps you from oversizing your case necks and overworking the brass, so your cases last longer and your necks stay more consistent run after run.

What Sets the 545154 Match Grade Set Apart

The big headline for 2025 is that the Click-Adjust Bullet Seating Micrometer now comes factory installed on the seating die. It gives you tactile clicks in .001 inch increments, so you can feel each adjustment and return to a known setting without guesswork. The seating die uses a floating sleeve that aligns the bullet and case neck as they enter, which helps keep runout down and seating depth repeatable. It also includes a roll crimp option if your particular load calls for it.

Dialing In Your .308 With the Match Grade Dies

The full-length sizing die ships with both an elliptical expander and a replaceable decap pin retainer. That elliptical expander takes less effort to pull through the neck than a traditional ball, and it generally leaves you with cleaner, more concentric necks. One thing worth knowing up front: the neck size bushings are sold separately so you can match the exact tension your brass and chamber want. A common starting point is measuring the neck of a loaded round and going down about .002 inch from there.

Everything stores in an included plastic box, and the set comes with two Sure-Loc rings. These dies use the standard 7/8-14 thread, so they'll thread into any common reloading press. For handloaders who want match-level consistency in neck tension and seating depth without jumping to a full custom setup, this is a strong, well-made choice.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 545154
  • UPC: 090255551549
  • Model: Match Grade
  • Caliber: .308 Win / 7.62 NATO
  • Die Type: Full-Length Sizing, Bullet Seating
  • Number of Dies: 2
  • Seating Micrometer: Click-Adjust Bullet Seating Micrometer, factory installed
  • Neck Sizing: Interchangeable self-centering bushings (sold separately)
  • Expander: Elliptical expander with replaceable decap pin retainer
  • Crimp: Roll crimp option on seating die
  • Thread: 7/8-14
  • Storage Box: Yes
  • Shell Holder Included: No
  • Country of Origin: USA

What’s Included

  • Full-length sizing die
  • Bullet seating die with factory-installed Click-Adjust Micrometer and roll crimp
  • Elliptical expander
  • Replaceable decap pin retainer
  • Two Sure-Loc rings
  • Plastic storage box

Frequently Asked Questions

Does the Hornady 545154 Match Grade die set come with a neck sizing bushing?

No, the bushings are sold separately so you can match the exact neck tension you want. You'll choose a cartridge-specific Hornady Match Grade bushing in .001 inch increments to complete the set. A common way to pick one is to measure the neck of a loaded round and drop down about .002 inch from that number.

What does the Click-Adjust Micrometer on this die do?

It controls bullet seating depth with tactile clicks in .001 inch increments, so you can feel each adjustment and return to a setting without guessing. New for 2025, it comes factory installed on the seating die rather than being a separate add-on. This makes dialing in and repeating a given seating depth quick and consistent.

Will these dies fit my .308 reloading press?

Yes. The set uses the standard 7/8-14 die thread, so it threads into any common single-stage or progressive press. Keep in mind a shell holder is not included, so you'll want a #1 shell holder for .308 Win if you don't already have one.

Can I load both .308 Win and 7.62 NATO with this set?

Yes, this set is designed for the .308 Win / 7.62 NATO cartridge family and handles both. The full-length sizing die returns fired brass to spec so it chambers reliably across semi-autos and bolt guns. Pairing the right bushing with the micrometer seating die lets you fine-tune loads for your specific rifle.

Additional information

UPC

090255551549

Manufacturer

Manufacturer Part Number

545154

Caliber/Gauge

.308 / 7.62 NATO

Shipping Weight

1.764

Reviews

There are no reviews yet.

Be the first to review “Hornady 545154 Match Grade .308 Win Die Set w/ Micrometer”