Description
The Hornady Match Grade Die Set in 7mm PRC is built for reloaders who chase consistency, giving you real control over neck tension during the sizing process. This two-die set covers a full-length bushing sizer and an in-line bullet seating die, both machined to tight tolerances so your cases come out straight and your runout stays low. For the 7mm PRC crowd loading long and heavy for distance, this is the kind of setup that pays off on paper.
What Sets the Match Grade 7mm PRC Dies Apart
The sizing die uses interchangeable, self-centering neck size bushings that let you fine-tune exactly how much the neck gets worked. Instead of oversizing and then expanding back out, you pick the bushing that gives you the neck tension you want, which keeps your brass from getting beat up and stretches case life considerably. The bushings thread into a free-floating, self-centering spindle, and a knurled spindle lock makes swapping them quick. Worth noting: the bushings are sold separately, so you'll want to grab the right diameter for your brass and neck thickness before your first session.
Seating Depth You Can Repeat with the 7mm PRC Seating Die
The seating die comes with Hornady's Click-Adjust Bullet Seating Micrometer, which is now factory-installed. You get audible, tactile clicks in .001 inch steps, so you can return to a proven seating depth without guesswork or feeler gauges. It ships with both a standard seating stem and a custom ELD Match stem, so sensitive match bullet tips stay protected. An elliptical expander, decap pin retainer, and two Sure-Loc rings round out the package.
Bushing Compatibility and Setup
One of the nicer touches is that Hornady Match Grade bushings play well beyond their own brand. The dies will accept bushings from Redding, RCBS, and L.E. Wilson, so if you already have a drawer full of bushings from another system, you aren't stuck starting over. The dies use a standard 7/8-14 thread and work in any common single-stage press. A shellholder is not included, so pick one up for 7mm PRC if you don't already run one.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 545151
- UPC: 090255551518
- Caliber: 7mm PRC (.284)
- Set Type: 2-Die Set (Full-Length Bushing Sizer + Bullet Seater)
- Seating Adjustment: Click-Adjust Bullet Seating Micrometer, factory-installed, .001" increments
- Neck Sizing: Interchangeable self-centering bushings (sold separately)
- Bushing Compatibility: Hornady, Redding, RCBS, L.E. Wilson
- Thread Size: 7/8"-14
- Finish: Silver
- Shellholder Included: No
- Country of Origin: USA
What’s Included
- Full-Length Bushing Style Sizing Die
- In-Line Bullet Seating Die with Click-Adjust Seating Micrometer
- Standard Bullet Seating Stem
- Custom ELD Match Bullet Seating Stem
- Elliptical Expander
- Decap Pin Retainer
- Two Sure-Loc Rings
- Plastic Storage Box
Frequently Asked Questions
Does the Hornady Match Grade 7mm PRC die set come with the neck sizing bushings?
No, the bushings are sold separately. This lets you choose the exact diameter that gives you the neck tension you want for your specific brass and neck thickness. Bushings are offered in .001 inch increments, so it's worth measuring a loaded round and working from there.
Can I use Redding or RCBS bushings in this Hornady die?
Yes. The Hornady Match Grade bushing sizing die accepts bushings from Redding, RCBS, and L.E. Wilson in addition to Hornady's own. If you already have bushings on hand from another brand, you can run them without buying a whole new set.
What makes the Click-Adjust micrometer worth it for 7mm PRC loads?
The micrometer gives you audible, tactile clicks in .001 inch increments, so you can return to a proven seating depth without measuring from scratch every time. That repeatability matters a lot with the long, high-BC bullets most folks run in 7mm PRC. It also comes factory-installed, so there's no extra setup out of the box.
Do I need anything else to start reloading 7mm PRC with this set?
You'll need the neck sizing bushing in your chosen diameter and a 7mm PRC shellholder, since neither is included. The dies use a standard 7/8-14 thread and fit any common single-stage press, so beyond those two items and your usual components you're ready to go.




Reviews
There are no reviews yet.