Description
The Hornady Match Grade Die Set for 6.5×47 Lapua is built for the reloader who treats seating depth and neck tension like they matter, because on a cartridge this precise, they do. This is the full-length 2-die configuration, pairing a bushing-style sizing die with an in-line seating die that now ships with the Click-Adjust Bullet Seating Micrometer installed right from the factory. If you have been running an older Match Grade set and upgrading the micrometer after the fact, this one already has it handled out of the box.
What Sets the Match Grade 6.5×47 Lapua Dies Apart
The big draw here is control over neck tension. Instead of a fixed sizing diameter, the full-length die runs interchangeable, self-centering bushings available in .001-inch steps, so you choose exactly how much you squeeze the neck down. That keeps you from oversizing and overworking brass, which is a real win with premium Lapua cases that tend to last a long time when treated right. The sizing die also uses an elliptical expander that takes noticeably less effort to pull through the neck, cutting down on friction and case-neck stretch.
Seating Depth You Can Actually Repeat
The seating side is where the Click-Adjust micrometer earns its keep. It gives you tactile clicks for .001-inch seating depth changes, so chasing the lands during load development becomes a matter of counting clicks rather than guessing and measuring. The in-line seating system uses a floating stem that holds the bullet in alignment with the case before it enters the neck, which helps keep runout down and seating depth consistent across a batch.
A Few Things Worth Knowing
One important detail: the neck size bushings are sold separately. The die set itself does not come with a bushing, so plan to pick the size that matches your brass and the neck tension you want. For 6.5×47 Lapua with typical no-turn Lapua brass, many loaders land somewhere around a .288 to .290 bushing depending on neck wall thickness and how much grip they prefer, though measuring your own fired brass is always the right call.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 545118
- UPC: 090255551181
- Model: Match Grade
- Caliber: 6.5×47 Lapua
- Bullet Diameter: .264
- Number of Dies: 2
- Die Style: Full-Length Bushing Sizing and In-Line Bullet Seating
- Seating Micrometer: Click-Adjust Bullet Seating Micrometer, factory installed
- Micrometer Adjustment: .001 inch per click
- Sizing Feature: Interchangeable self-centering neck bushings and elliptical expander
- Color: Silver
- Firearm Type: Rifle
- Bushing Included: No, sold separately
- Shipping Weight: 1.7 lbs
What’s Included
- Full-length bushing-style sizing die
- In-line bullet seating die with Click-Adjust seating micrometer (factory installed)
- Standard bullet seating stem
- Custom ELD Match bullet seating stem
- Elliptical expander
- Decap pin retainer
- Die storage box
Frequently Asked Questions
Does the Hornady Match Grade 6.5×47 Lapua die set come with a neck bushing?
No, the bushing is sold separately. These Match Grade dies are designed around interchangeable self-centering bushings so you can tailor neck tension to your exact brass, and you select the size that fits your setup. Bushings are offered in .001-inch increments, so measure your fired brass before ordering.
What bushing size should I start with for 6.5×47 Lapua?
It depends on your brass and how much neck tension you want, so measuring is always best. With typical no-turn Lapua brass, many reloaders land in the .288 to .290 range for roughly .002 inches of tension. A good rule of thumb is to measure a loaded round's neck diameter, then choose a bushing about .002 inches smaller to account for brass spring-back.
Is the Click-Adjust seating micrometer already installed on this set?
Yes. For 2025, Hornady ships the Click-Adjust Bullet Seating Micrometer factory installed on the Match Grade seating die, so you do not need to buy or add it separately. It gives tactile clicks for .001-inch seating depth adjustments, which makes repeatable seating and load development much easier.
What is the difference between this Match Grade set and Hornady's Custom Grade dies?
The Match Grade set uses a full-length bushing sizing die that lets you control neck tension, while standard Custom Grade dies size the neck to a fixed diameter. The Match Grade seating die also adds the Click-Adjust micrometer and ships with both a standard stem and a custom ELD Match stem. If you are chasing precision and want to tune neck tension and seating depth, the Match Grade set is the one built for it.




Reviews
There are no reviews yet.