0
0

Hornady Match Grade 2-Die Set w/ Click-Adjust Micrometer – 25 Creedmoor

UPC: 090255551174

$173.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Built for the handloader who chases single-digit standard deviations, this Hornady Match Grade 2-Die Set pairs a bushing full-length sizing die with a seating die that now wears Hornady's Click-Adjust Micrometer straight from the factory. It's chambered for 25 Creedmoor, the short-action .25 cal cartridge Hornady designed alongside bullet development to feed from AICS-style magazines and punch way above its recoil class at distance. If you've been running a standard die set and want more say over how your brass is worked, this is the step up.

What the Click-Adjust Micrometer Brings to the Bench

The seating die's micrometer moves in crisp .001-inch clicks, so you can feel each adjustment instead of squinting at a scale. Once you find the seating depth your rifle likes, you can back it out, swap to another load, and return to the exact same number with confidence. That tactile feedback takes a lot of the guesswork out of load development and makes chasing the lands repeatable from one session to the next.

Neck Tension Control with the Match Grade Bushing Die

The full-length sizing die uses interchangeable, self-centering neck bushings so you can fine-tune neck tension instead of being locked into whatever a standard die hands you. Sizing only as much as you need keeps you from overworking the brass, which stretches case life and keeps your necks concentric. A free-floating spindle handles decapping and expansion with minimal runout, and the knurled spindle lock makes bushing swaps quick. One thing worth knowing before you order: the neck bushings are sold separately, so you'll want to pick up the right bushing for your brass and target tension to complete the setup.

Why 25 Creedmoor Reloaders Reach for This Set

The seating die also includes a floating bullet alignment sleeve that pre-aligns the bullet and case before seating begins, which helps keep everything straight and your groups honest. Everything threads 7/8-14 and drops right into any standard single-stage or progressive press, and it all stores in the included plastic die box. For a 25 Creedmoor shooter who's serious about consistency, this is a practical, well-built foundation.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 545117
  • UPC: 090255551174
  • Caliber: 25 Creedmoor
  • Projectile Diameter: .257"
  • Number of Dies: 2
  • Die Type: Bushing Full-Length Sizing Die and Bullet Seating Die
  • Seating Adjustment: Click-Adjust Micrometer, .001" per click
  • Thread Size: 7/8"-14
  • Shellholder Included: No
  • Neck Bushing Included: No, sold separately
  • Storage Box Included: Yes
  • Country of Origin: USA

What’s Included

  • Match Grade bushing full-length sizing die
  • Match Grade seating die with factory-installed Click-Adjust Micrometer
  • Plastic die storage box

Frequently Asked Questions

Does the Hornady Match Grade die set come with the neck bushing?

No, the neck bushings are sold separately on the Match Grade line. You'll need to select the bushing that matches your brass and the neck tension you're after to complete the die. It's a good idea to measure a loaded round's neck diameter so you order the correct size the first time.

What does the Click-Adjust Micrometer actually do?

It controls bullet seating depth in tactile .001-inch clicks, so you can feel each adjustment rather than reading a tiny scale. Once you dial in a depth your rifle shoots well, you can return to that exact setting later, which makes load development and repeat loads far more consistent. New for 2025, it comes factory installed on the seating die.

Will this die set fit my press?

Yes, both dies use the standard 7/8"-14 thread size, so they'll thread into any common single-stage or progressive reloading press. A shellholder is not included, so if you don't already have the correct one for 25 Creedmoor you'll want to grab it separately.

What's the advantage of the bushing full-length sizing die over a standard die?

The interchangeable, self-centering bushing lets you control exactly how much the case neck is sized, so you set your own neck tension instead of accepting a fixed amount. Sizing only what you need avoids overworking the brass, which extends case life and helps keep necks concentric for tighter groups.

Additional information

UPC

090255551174

Manufacturer

Manufacturer Part Number

545117

Caliber/Gauge

.257 Weatherby Magnum

Shipping Weight

1.695

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade 2-Die Set w/ Click-Adjust Micrometer – 25 Creedmoor”