Description
Precision handloading for .223 Rem comes down to two things: controlling how your brass gets sized and nailing consistent seating depth. This Hornady Match Grade 2-die set is built to handle both. The full-length sizing die uses interchangeable, self-centering neck size bushings, which means you set your own neck tension instead of letting the die over-work the brass every cycle. Less overworking equals longer case life and more uniform rounds coming off the press, and that translates to tighter groups downrange with your .223 Rem or 5.56 NATO loads.
What the Click-Adjust Micrometer Brings to the Bench
The standout here is the seating die, which ships with Hornady's Click-Adjust Bullet Seating Micrometer factory installed. Introduced in 2024 and now built right into the Match Grade seating dies, the micrometer gives you tactile clicks in .001" increments so you can find your seating depth, write it down, and return to it later without guesswork. If you're chasing an accuracy node or loading for different bullet shapes, being able to repeat a setting exactly is a real time saver.
Dialing In the Hornady Match Grade 223 Rem Set
The sizing die accepts Hornady neck bushings, which are held to tight tolerances and sold separately so you can match the bushing to your specific brass and chamber. Figuring out the right size is straightforward: measure the neck diameter of a loaded or dummy round with a good micrometer and subtract about .001" to .002" for proper neck tension. The dies use standard threading and work with common single-stage and progressive presses, and the seating die includes a roll crimp if your load calls for it.
Built for Reloaders Who Sweat the Details
This is a setup aimed at folks who care about consistency, whether that's precision rifle work, varmint loads, or just squeezing the best groups out of an AR or bolt gun. Everything is made in the USA, and the bushing system plus the Click-Adjust micrometer give you the kind of repeatable control that separates good handloads from great ones.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 545100
- UPC: 090255551006
- Caliber: .223 Rem / 5.56 NATO
- Bullet Diameter: .224"
- Dies In Set: 2
- Die Type: Bushing Full-Length Sizer and Bullet Seater
- Seating Micrometer: Click-Adjust, factory installed, .001" increments
- Shell Holder Cap: #16
- Neck Bushings: Interchangeable, self-centering (sold separately)
- Country of Origin: USA
- Shipping Weight: 1.739 lbs
What’s Included
- Full-length bushing style sizing die
- In-line bullet seating die with factory-installed Click-Adjust Micrometer
- Elliptical expander
- Decap pin retainer
- Standard bullet seating stem
- Custom ELD Match bullet seating stem
- Two Sure-Loc lock rings
- Plastic storage box
Frequently Asked Questions
Do neck bushings come with the Hornady Match Grade 223 die set?
No, the neck bushings are sold separately. The die accepts interchangeable, self-centering bushings so you can pick the exact size that fits your brass and the neck tension you want. You'll need to add a cartridge-specific bushing to complete the setup.
How do I figure out which bushing size I need?
The easiest method is to measure the neck diameter of a loaded or dummy round with an accurate micrometer, then subtract about .001" to .002" from that number. That gives you roughly .001" to .002" of neck tension after brass spring back. You can also measure neck wall thickness with a ball micrometer, double it, and add it to the bullet diameter.
Is the Click-Adjust Micrometer already installed on the seating die?
Yes. Starting in 2025, Hornady ships the Click-Adjust Bullet Seating Micrometer factory installed on their Match Grade seating dies, so this set comes ready to go. It adjusts in tactile .001" clicks, which makes returning to a known seating depth quick and repeatable.
Will this die set work for both .223 Rem and 5.56 NATO?
Yes, it's set up for .223 Rem and 5.56 NATO brass since they share the same case dimensions. It's a full-length sizing set, which is a good choice for rounds that need to cycle reliably in semi-autos as well as bolt guns. You'll want a #16 shell holder to run it on your press.




Reviews
There are no reviews yet.