0
0

Hornady Series III Full Length Sizer Die 338 ARC Reloading Die

UPC: 090255464610

$49.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're running a 338 ARC and want to keep feeding it, this is the die that brings your fired brass back to shape. The Hornady Series III Full Length Sizer Die resizes spent 338 ARC cases down to proper chamber dimensions so your handloads chamber clean and feed right, whether you're running an AR-15 or a micro-action bolt gun. This is the sizer die on its own, so it slots nicely into an existing setup or lets you build out exactly the die bench you want.

The 338 ARC was built by Hornady as a subsonic-optimized round based on the 6.5 Grendel case, and it's found a loyal following with folks running suppressed setups for hunting and quiet range time. That 307-grain Sub-X load and the heavy bullets this cartridge likes make clean, consistent brass prep worth the effort, and a good full length die is where that starts.

What Sets the Hornady 338 ARC Sizer Die Apart

The standout here is the Zip Spindle. Light threads are cut on both the spindle and the collet, so it locks positively and won't slip on you mid-session. For big adjustments you can just zip it up or down, and for fine tuning you turn it in small increments. The elliptical expander is the other piece worth calling out. It glides through the neck instead of dragging like an old ball expander, which cuts friction and keeps case neck stretch in check. The hardened steel decapping pin handles depriming without bending or breaking, even when you hit crimped primer pockets.

Fit and Everyday Use at the Bench

The interior is machined and polished smooth so brass runs through without sticking or scuffing. It wears standard 7/8-14 threads, so it'll thread into any press that takes common dies. The Sure-Loc lock ring clamps around the full body of the die and holds your setting with even pressure, and the locking screw tightens without chewing into the threads. Give your brass a light coat of case lube before sizing and it runs smooth all day. Hornady backs it with their lifetime warranty.

Key Specifications

  • Manufacturer: Hornady
  • Cartridge: 338 ARC
  • Die Type: Full Length Sizer Die
  • Series: Series III (Custom Grade New Dimension)
  • Thread Size: 7/8-14
  • Expander: Elliptical Expander
  • Spindle: Zip Spindle
  • Decapping Pin: Hardened Steel
  • Lock Ring: Sure-Loc
  • Warranty: Hornady No-Risk Lifetime Warranty
  • Manufacturer Part Number: 046461
  • UPC: 090255464610
  • Shipping Weight: 0.533 lbs

What’s Included

  • Full Length Sizer Die (338 ARC)
  • Sure-Loc Lock Ring
  • Elliptical Expander
  • Zip Spindle
  • Hardened Steel Decapping Pin

Frequently Asked Questions

Is this the full die set or just the sizer die for 338 ARC?

This is the Full Length Sizer die on its own, not the two-die set. You'll get the sizing die with its Zip Spindle, elliptical expander, decap pin, and Sure-Loc lock ring. If you also need a seating die, you'd pick that up separately or go with the complete 338 ARC two-die set.

Will this die work with my press?

It uses standard 7/8-14 threads, so it fits any reloading press that takes common dies. That covers the vast majority of single-stage and progressive presses out there. Just thread it in, set your depth, and lock it down with the included Sure-Loc ring.

What does the Zip Spindle do?

The Zip Spindle has light threads cut on both the spindle and the collet so it locks in place and won't slip during use. For larger moves you can zip it up or down quickly, and for fine adjustments you turn it in small increments. It makes tightening the spindle lock a lot easier when dialing in your setup.

Can this die handle crimped primer pockets when depriming 338 ARC brass?

Yes. The hardened steel decapping pin is built to stand up to depriming, including cases with crimped primer pockets, without bending or breaking. The 338 ARC is based on the 6.5 Grendel case, so expect typical brass prep and a light coat of case lube before sizing keeps everything running smooth.

Additional information

UPC

090255464610

Manufacturer

Manufacturer Part Number

046461

Shipping Weight

0.533

Reviews

There are no reviews yet.

Be the first to review “Hornady Series III Full Length Sizer Die 338 ARC Reloading Die”