0
0

Hornady .350 Legend Custom Grade Full Length Sizing Die

UPC: 090255463965

$48.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading your own .350 Legend, this Hornady Custom Grade full length sizing die is where the process starts. It takes fired, stretched brass and brings it back down to proper dimensions so your reloads chamber and feed the way they should, whether you're running a bolt gun or an AR-15. Hornady machines these dies with CNC precision to tight tolerances, and the internal profile is polished smooth to cut down on friction and keep cases from sticking during the stroke.

The .350 Legend is a straight-walled cartridge that uses a .355 inch bullet, closer to 9mm than the .357 or .358 bullets some folks expect. This die is cut for that cartridge specifically, so it sizes the case body and neck to grip those .355 projectiles correctly. Pair it up with a standard .223 Remington shell holder, since the Legend shares the same rim diameter, and you're set to start cranking out ammo.

What Sets the Hornady .350 Legend Sizing Die Apart

Two features do the heavy lifting here. The Zip Spindle uses a series of light threads cut into the spindle and collet, which locks the decapping assembly in place and eliminates the slippage you fight with older designs. Adjustments stay put and tightening the lock is easy on your hands. The polished elliptical expander is the other standout, and it works the case neck more gently than a traditional ball expander, which helps reduce neck stretch and keeps your brass lasting longer.

Built to Outlast Your Loading Bench

The hardened steel decapping pin is tough enough to knock out spent primers even on cases with crimped primer pockets, so it won't bend or snap on you mid-session. The die comes with a Sure-Loc lock ring that has wrench flats for repeatable, no-slip settings. Hornady backs these Custom Grade dies with a lifetime guarantee against breaking or wearing out under normal use, so this is one of those tools you buy once and keep. A quick spray of case lube before you start and you'll be running smooth.

Key Specifications

  • Manufacturer: Hornady
  • Cartridge: .350 Legend
  • Bullet Diameter: .355"
  • Die Type: Full Length Sizing Die
  • Product Line: Custom Grade New Dimension
  • Die Series: V
  • Material: Steel
  • Spindle: Zip Spindle Design
  • Expander: Polished Elliptical Expander
  • Lock Ring: Sure-Loc with wrench flats
  • Thread: 7/8"-14
  • Warranty: Lifetime guarantee against breakage and wear
  • Manufacturer Part Number: 046396
  • UPC: 090255463965
  • Quantity: 1 die

What’s Included

  • Hornady .350 Legend full length sizing die
  • Hardened steel decapping pin (installed)
  • Sure-Loc lock ring

Frequently Asked Questions

What shell holder do I need for the .350 Legend sizing die?

The .350 Legend uses the same rim diameter as the .223 Remington, so a standard .223 Rem shell holder works with this die. Shell holders are sold separately and are not included with the die. Hornady shell holder number 16 is the common match for this cartridge.

Does this die work with .355 bullets?

Yes. The .350 Legend is designed around a .355 inch bullet, which is the same nominal diameter as 9mm, and this die sizes the case to properly grip those projectiles. Avoid loading .357 or .358 bullets, since they can oversize the case neck and cause feeding or chambering trouble.

Is this a single die or a complete die set?

This is the full length sizing die only, sold as a single unit. If you want a complete setup, Hornady also offers a Custom Grade die set for the .350 Legend that adds the seating die, expander die, and taper crimp die. For most reloaders, the sizing die plus a seating die covers the basics.

Do I need case lube with this sizing die?

Yes, full length sizing straight-walled rifle brass takes some force, so you'll want to lube your cases first. Hornady recommends a light coat of case lube, such as their One Shot spray, before running brass through the die. It keeps the stroke smooth and prevents cases from sticking inside.

Additional information

UPC

090255463965

Manufacturer

Manufacturer Part Number

046396

Shipping Weight

2.0688

Reviews

There are no reviews yet.

Be the first to review “Hornady .350 Legend Custom Grade Full Length Sizing Die”