Description
Neck sizing is one of those techniques precision reloaders swear by, and this Hornady Custom Grade Series IV die is built to do it right for the 22 PPC. Instead of pushing the whole case back down to minimum spec, it only works the case neck. That leaves your fire-formed brass sized to your specific rifle's chamber, which cuts down on case stretch, keeps headspace in check, and squeezes more reloads out of every piece of brass. It's a bolt-action reloading tool through and through, since neck-sized cases need to go back into the same rifle that formed them.
What Sets This 22 PPC Neck Sizer Apart
At the heart of the die is Hornady's elliptical expander, which they consider a step up from the old ball-style expanders. It glides through the neck with less friction and less case-neck stretch, and the internal threading keeps it from pulling loose mid-stroke. The expander and hardened steel headed decapping pin are mated to the Zip Spindle, which locks down positively so you don't get slippage once you've dialed in your setting. Light threads on the spindle and collet let you make fine incremental adjustments or zip it up and down for bigger moves.
Fit, Finish, and Day-to-Day Use
The inside of the die carries Hornady's hand-polished mirror finish, so brass slides in and out smooth and your case necks stay scratch-free. It comes with a Sure-Loc lock ring that clamps around the full body of the die and holds its setting without the locking screw ever biting into the threads, so you won't chew up your die trying to snug it down. The wrench flats make swapping it in and out of your press quick.
The die uses the standard 7/8"-14 thread, so it drops right into any press set up for common dies. For PPC shooters chasing that last bit of consistency on the bench, neck sizing with a die like this is a reliable way to keep groups tight and brass lasting longer.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 046053
- UPC: 090255460537
- Caliber: 22 PPC (.224")
- Die Type: Neck Sizing Die
- Series: Custom Grade Series IV
- Number of Dies: 1
- Thread Size: 7/8"-14
- Expander Type: Elliptical Expander
- Spindle: Zip Spindle
- Decapping Pin: Hardened Steel Headed Decap Pin
- Lock Ring: Sure-Loc with Wrench Flats
- Interior Finish: Hand-Polished
- Intended Use: Bolt-Action Rifles
- Country of Origin: USA
What’s Included
- Hornady 22 PPC Neck Sizing Die
- Sure-Loc Lock Ring
- Removable Elliptical Expander
- Hardened Steel Headed Decap Pin
- Decap Pin Retainer
Frequently Asked Questions
Can I use this 22 PPC neck sizer die in a semi-auto or lever gun?
No, this die is meant for cases fired in bolt-action rifles only. Neck-sized brass stays fire-formed to the chamber that shaped it, so it needs to go back into that same manually operated rifle. Auto-loaders, lever, and pump actions usually need full-length resizing to feed and function reliably.
Why would I neck size instead of full-length resize?
Neck sizing only works the case neck and leaves the body fire-formed to your chamber, which improves consistency, keeps headspace tight, and extends brass life. Because you're moving less brass with each cycle, cases tend to last through more reloads. It's a go-to method for bench and precision shooters chasing tighter groups.
Will this Hornady die fit my reloading press?
Yes. It uses the standard 7/8"-14 thread, so it threads into any press set up for common reloading dies. The included Sure-Loc lock ring with wrench flats makes it easy to install, adjust, and swap out.
What is the elliptical expander and why does it matter?
The elliptical expander is Hornady's alternative to traditional ball expanders. It passes through the case neck with less friction and reduces case-neck stretch for smoother, more consistent sizing. Internal threading keeps it locked in place so it won't pull loose during your stroke.





Reviews
There are no reviews yet.