Description
Loading up for a lever gun or a straight-wall hunting rifle? The Hornady MonoFlex in .458 diameter is a 250-grain monolithic bullet built to deliver dependable terminal performance across a wide velocity window. It pulls together two of Hornady's best ideas: the solid, deep-penetrating copper-alloy body borrowed from the GMX, and the red Flex Tip up front that drives expansion even when impact speeds drop off at distance. That combination makes it a strong match for cartridges like the 45-70 Government and 450 Bushmaster, where velocities can fall below what traditional copper bullets need to reliably open.
What Sets the MonoFlex .458 Apart
Because it's a one-piece copper-alloy design, there's no jacket and core to separate on impact. Recovered bullets typically hold around 95 percent of their original weight, which translates to deep, straight penetration on everything from hogs to elk. The copper alloy Hornady uses runs harder and tougher than pure copper, so it fouls the bore less and keeps pressures in check compared to many solid copper options. The pointed polymer tip also gives you a cleaner profile than a flat-nose lead bullet without any worry about chambering it alongside others.
Flex Tip Made for Tubular Magazines
The patented Flex Tip is the key here. In a tube-fed lever rifle, you normally can't stack pointed bullets nose-to-primer. The soft, flexible tip solves that, letting you run a more aerodynamic bullet safely in tubular magazines while that same tip initiates expansion on game. At 250 grains it sits on the lighter end for .458, which keeps velocity up and recoil manageable while still hitting hard.
Spec Notes for Reloaders
These are component bullets, not loaded ammunition, so you'll be seating them yourself. They carry a cannelure for a solid crimp, a .175 G1 ballistic coefficient, and a sectional density of .170. Pair them with your preferred powder and 45-70, 450 Bushmaster, or 458 brass and you've got a hunting load ready to build.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 45010
- UPC: 090255450101
- Bullet Caliber: .45 Caliber
- Bullet Diameter: .458 in
- Bullet Weight: 250 Grain
- Bullet Type: MonoFlex (Polymer Tip)
- Core/Construction: One-Piece Copper Alloy (Monolithic)
- Ballistic Coefficient (G1): .175
- Sectional Density: .170
- Cannelure: Yes
- Quantity: 50 Per Box
- Application: Medium to Large Game
What’s Included
- 50 Hornady MonoFlex .45 Cal (.458) 250gr component bullets
Frequently Asked Questions
Are the Hornady MonoFlex .458 250gr loaded cartridges or component bullets?
These are component bullets only, not loaded ammunition. You'll seat them into your own brass with your chosen powder and primer as part of the reloading process. The box contains 50 bullets.
What cartridges do these MonoFlex .458 bullets work in?
The .458 diameter and 250-grain weight make these a natural fit for 45-70 Government, 450 Bushmaster, and other .458 bore hunting rounds. Because the Flex Tip opens at lower velocities, they shine in lever guns and straight-wall cartridges where impact speeds can taper off at distance. Always work up your load using published reloading data for your specific cartridge.
Can I use the pointed MonoFlex in a tube-fed lever rifle?
Yes, that's exactly what the Flex Tip was designed for. The soft, flexible polymer tip lets you safely stack pointed bullets in a tubular magazine without the risk of a primer being set off under recoil. You get a more aerodynamic profile than a flat-nose bullet with none of the worry.
How well does the MonoFlex hold together on game?
The one-piece copper-alloy build has no jacket and core to come apart, so it stays intact through bone and heavy muscle. Recovered bullets typically retain around 95 percent of their original weight, which means consistent, deep penetration. That weight retention is a big reason hunters reach for this bullet on larger game.




Reviews
There are no reviews yet.