Description
The Hornady Custom Grade Seater Die handles the final and arguably most important step of loading a quality cartridge: getting the bullet seated straight and to a repeatable depth. This single seater die covers the 7mm family built around the .284 bullet, so it fits popular rounds like 7mm Remington Magnum, .280 Remington, 7mm STW, and 7mm PRC. It threads into any standard press with 7/8-14 threads and drops right into your existing setup.
What Makes the Custom Grade Seater Die Tick
The heart of this die is Hornady's in-line bullet seating system. A floating alignment sleeve holds the bullet, case mouth, and seating stem in line with each other before the bullet ever enters the case neck. That pre-alignment is what keeps runout low and prevents the bullet base from getting nicked or deformed on the way in. The result is straighter ammo and more consistent seating depth, which is exactly what you're chasing when you're trying to shrink groups.
Dialing In the Hornady Seater Die
Setup is straightforward. The seater adjustment screw lets you tune bullet seating depth in small, precise increments, and a compression lock O-ring adds the right amount of tension so your fine adjustments hold where you set them. The die also includes a built-in roll crimp if you want it, and backing the crimp off for a no-crimp seat is just a matter of raising the die. A locking retainer ring pops off in seconds when it's time to pull the die apart for cleaning.
Hornady builds these from select heat-treated steel with one of the smoothest internal finishes in the business, and they back the Custom Grade line to run a lifetime under normal use. It ships with the double-flat Sure-Loc lock ring already installed and comes packed in a reusable plastic die box. Whether you're loading for the range or working up a precision hunting load, this is a dependable, no-drama seater that earns its spot on the bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 044133
- UPC: 090255441338
- Die Type: Bullet Seating Die
- Caliber / Bullet Diameter: 7mm / .284
- Number of Dies: 1
- Thread Size: 7/8-14
- Crimp Style: Roll crimp (built in, optional)
- Seating System: In-line floating bullet alignment sleeve and floating steel seating stem
- Lock Ring: Double-flat Sure-Loc lock ring installed
- Shipping Weight: 0.515 lb
What’s Included
- Hornady Custom Grade seater die (1)
- Double-flat Sure-Loc lock ring (installed)
- Reusable plastic die box
Frequently Asked Questions
What cartridges does this Hornady Custom Grade Seater Die fit?
This die is built for the 7mm family that uses the .284 bullet diameter, including rounds like 7mm Remington Magnum, .280 Remington, 7mm STW, and 7mm PRC. It's a single seating die rather than a full set, so it's a great match if you already have a sizing die or want to replace a worn seater. Always confirm your specific cartridge against the .284 caliber grouping before ordering.
Does the Custom Grade Seater Die apply a crimp?
Yes, it has a built-in roll crimp ring. You can use it to crimp the case mouth, or raise the die so it seats the bullet without any crimp at all. Many precision loaders skip the crimp for rifle rounds and let the die do straight-line seating only.
Will this die work in my press?
It uses standard 7/8-14 threads, so it fits virtually any single stage or turret press designed for common reloading dies. The double-flat Sure-Loc lock ring comes installed, so you can set your height, lock it down, and have repeatable setup every session.
How does the floating alignment sleeve improve accuracy?
The in-line seating system holds the bullet, case mouth, and seating stem aligned inside a floating sleeve before the bullet enters the neck. That keeps runout low and protects the bullet base from deformation, which translates to straighter ammo and more consistent seating depth. It's a big part of why these dies produce such tight, repeatable results.




Reviews
There are no reviews yet.