0
0

Hornady Custom Grade Seater Die .350 Legend / .357 Herrett

UPC: 090255441253

$29.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Reloading .350 Legend at home means you want every bullet going in straight, and this Hornady Custom Grade seater die is built to make that the easy part. The heart of it is a floating alignment sleeve that holds the bullet, case mouth, and seater stem in line before the bullet ever starts into the case. That little bit of self-centering goes a long way toward preventing deformed bullet bases and the kind of runout that opens up your groups at distance. It threads into any standard 7/8"-14 press, and as a nice bonus this die also handles .357 Herrett if you happen to load that round too.

What Sets the Hornady Custom Grade Seater Die Apart

Hornady machines these from select steel and polishes the internals to a smooth finish, which is part of why they back the Custom Grade line with a lifetime guarantee against breaking or wearing out under normal use. The seater adjustment screw dials in your exact seating depth without fuss, and an O-ring style compression lock gives you the tension needed to hold fine adjustments in place once you've found the sweet spot. There's also a built-in crimp ring, so you can roll crimp to keep bullets seated firmly or back it off completely for a no-crimp load.

Setting Up and Maintaining the .350 Legend Seater Die

The locking retainer ring at the base pops out in seconds, which makes pulling the die apart for cleaning quick work. Hornady's Sure-Loc lock ring clamps around the entire die body and applies constant pressure, and because the locking screw doesn't bite into the threads, you won't chew up your die with a pair of pliers. Setup is straightforward whether you're a first-year reloader or someone who's been dropping powder for decades.

This is a single seater die, not a full set, so it's a great pickup if you're replacing a worn stem, upgrading from a basic seater, or building out your bench piece by piece for the .350 Legend.

Key Specifications

  • Manufacturer: Hornady
  • Caliber: .350 Legend / .357 Herrett
  • Die Type: Bullet Seating Die
  • Die Series: Custom Grade (Series V)
  • Quantity: 1 Die
  • Thread Size: 7/8"-14
  • Crimp: Built-in roll crimp ring (can be raised for no crimp)
  • Lock Ring: Hornady Sure-Loc
  • Cartridge Type: Rifle
  • Made in USA: Yes
  • Manufacturer Part Number: 044125
  • UPC: 090255441253
  • Shipping Weight: 0.5 lb

What’s Included

  • Hornady Custom Grade in-line bullet seating die
  • Standard bullet seating stem
  • Hornady Sure-Loc lock ring (installed)
  • Custom die storage box

Frequently Asked Questions

Does this Hornady seater die fit both .350 Legend and .357 Herrett?

Yes. This die is chambered to work with both .350 Legend and .357 Herrett cartridges, since they share the same bullet diameter and compatible dimensions. If you load either round, this single die covers you for seating.

Can the Hornady Custom Grade seater die crimp my .350 Legend loads?

It can. The die has a built-in roll crimp ring you can set to apply a crimp for holding bullets firmly in place. If you'd rather run a no-crimp load, you simply raise the die so the crimp ring doesn't contact the case mouth.

Is this a complete die set or just the seating die?

This is the single seating die only, not a full die set. It's ideal if you already have a sizing die and just need a seater, or if you're replacing or upgrading an existing one. If you want everything to load .350 Legend from scratch, you'd want the full Custom Grade die set instead.

Will this die work in my reloading press?

It uses the industry-standard 7/8"-14 thread, so it fits virtually any standard single-stage, turret, or progressive press on the market. If you run a modern Hornady press with the Lock-N-Load bushing system, you'll want the matching die bushings to use the quick-change feature.

Additional information

UPC

090255441253

Manufacturer

Manufacturer Part Number

044125

Shipping Weight

0.5

Reviews

There are no reviews yet.

Be the first to review “Hornady Custom Grade Seater Die .350 Legend / .357 Herrett”