0
0

Hornady Lock-N-Load Conversion Kit 044099 Multi-Caliber Steel Bushings

UPC: 090255440997

$21.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady Lock-N-Load Conversion Kit is the bridge between your current reloading press and Hornady's quick-change bushing system. If you've got a press with 1-1/4"-12 threads, like the RCBS Rock Chucker and plenty of other single-stage presses out there, this kit threads right in and opens the door to the same Lock-N-Load convenience that comes standard on Hornady presses. No new press required, no permanent modifications, just a smarter way to work at the bench.

The idea is simple. You thread a standard 7/8"-14 die into a Lock-N-Load die bushing, set it once, and lock the ring. From then on, that die drops into the press and locks with a slight clockwise twist, held in rock-solid alignment by six locking lugs. When it's time to switch calibers or stages, you twist counterclockwise about a sixth of a turn, pull the die assembly out, and drop in the next one. Because each die stays married to its bushing, your settings don't budge. That means no re-adjusting headspace or seating depth every time you swap, which is where this system really earns its keep.

What the Lock-N-Load Conversion Kit Brings to Your Bench

Everything is machined from steel for durability and positive, repeatable lockup. The main conversion bushing threads into the press body and acts as the host, while the three included die bushings give you a head start on building out your most-used dies. Reloaders running multiple cartridges tend to stock up on extra die bushings over time so every die has its own dedicated home, and this kit is the piece that makes that whole workflow possible on a non-Hornady press.

Getting the Most Out of the 044099 Kit

This is a true multi-caliber setup. The bushings don't care what cartridge you're loading, so one kit covers everything from .223 up through big-bore rifle and handgun rounds. If you've been eyeing the Lock-N-Load bushings but figured you needed to buy a whole new press to use them, this little kit is the answer you were looking for.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number (MPN): 044099
  • UPC: 090255440997
  • Caliber: Multi-Caliber
  • Material: Steel
  • Color: Silver
  • Press Thread Compatibility: 1-1/4"-12
  • Die Thread Accepted: 7/8"-14
  • Product Type: Press Conversion Kit / Die Bushings
  • Country of Origin: United States
  • Shipping Weight: 0.35 lbs

What’s Included

  • 1 Lock-N-Load press conversion bushing
  • 3 Lock-N-Load die bushings

Frequently Asked Questions

What presses does the Lock-N-Load Conversion Kit fit?

It works with any single-stage press that uses a 1-1/4"-12 thread in the press body, including the RCBS Rock Chucker and a number of other competitor presses. The conversion bushing threads right into that opening. Once it's installed, your press can accept Hornady Lock-N-Load die bushings just like a factory Hornady press.

How does the Lock-N-Load bushing system actually speed up caliber changes?

You set each die in its own bushing once and lock it in place. After that, the die drops into the press and locks with a quick clockwise twist, and six locking lugs hold it in perfect alignment. To switch, you twist counterclockwise about a sixth of a turn and pull it out, and since the die stays set in its bushing, you don't have to readjust anything when you put it back.

What kind of dies work with this kit?

Any standard die with 7/8"-14 threads fits the Lock-N-Load die bushings, which covers the vast majority of reloading dies on the market. You thread the die into a bushing, adjust it as usual, and tighten the lock ring. From then on that die and bushing travel together as a unit.

Do three die bushings cover everything I need?

The kit gives you one conversion bushing and three die bushings to get started, which is enough for a basic die set. Reloaders who run several cartridges usually pick up additional die bushings over time so every die has a dedicated home. They're sold separately in multi-packs and are inexpensive to add as your collection grows.

Additional information

UPC

090255440997

Manufacturer

Manufacturer Part Number

044099

Caliber/Gauge

Multi

Shipping Weight

0.35

Reviews

There are no reviews yet.

Be the first to review “Hornady Lock-N-Load Conversion Kit 044099 Multi-Caliber Steel Bushings”