Description
The Hornady A-Tip Match .338 Caliber 300 grain is the heavy hitter of the A-Tip lineup, built for people who want every bit of performance out of a .338 at distance. This 300-grain projectile carries a G1 ballistic coefficient of .863 and a G7 of .435, with a sectional density of .375, which adds up to a bullet that bucks wind and holds velocity way downrange. Hornady recommends a 1:10 twist to stabilize it properly, so make sure your barrel is up to the task before you load up a batch.
What Sets the A-Tip Match .338 Apart
The headline feature is that long, precision-machined aluminum tip. It's longer than a typical polymer tip, which shifts the center of gravity forward and sharpens in-flight stability. Hornady's patented DVRT design gives it a flat meplat that tightens drag uniformity, so you see less vertical dispersion and smaller groups the farther out you push. The whole profile, from the ogive to the bearing surface to the boattail, is tuned specifically for the .338 bore rather than borrowed from another caliber.
Consistency You Can Measure With These 300 gr A-Tip Bullets
What really makes these bullets tick is how they're packaged. They come off the press sequentially, one clone after the next, with no batch tumbling or heavy handling that could scuff or alter a projectile. That means the bullet at the top of the box behaves like the one at the bottom. The refined AMP jacket brings the concentricity and uniformity that Hornady is known for, and the low-drag design is forgiving of small changes in seating depth, twist rate, and muzzle velocity.
Getting the Most Out of Your Hornady A-Tip Match Bullets
Since these aren't bulk washed, there's a light oil film from manufacturing, so each box ships with a polishing bag to buff them clean before they hit the press. One thing worth noting: Hornady recommends a dedicated A-Tip seating stem for proper seating, since the long aluminum tip doesn't play well with standard stems. Get that squared away and these will reward careful load development with serious precision.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 33389
- UPC: 090255333893
- Caliber: .338 (.338 diameter)
- Bullet Weight: 300 Grain
- Bullet Type: A-Tip Match
- Tip Material: Aluminum
- Jacket Material: Copper (AMP jacket)
- Core Material: Lead
- G1 Ballistic Coefficient: 0.863
- G7 Ballistic Coefficient: 0.435
- Sectional Density: 0.375
- Recommended Twist Rate: 1:10
- Overall Length: 6.15
- Application: Target / Match
- Quantity: 100 Per Box
What’s Included
- 100 Hornady A-Tip Match .338 Caliber 300 grain bullets
- Bullet polishing bag
Frequently Asked Questions
What twist rate do the Hornady A-Tip Match .338 300 gr bullets need?
Hornady recommends a 1:10 twist rate to properly stabilize this 300-grain bullet. With its high sectional density and long profile, a 1:10 barrel keeps it spinning fast enough for consistent accuracy at distance. Check your barrel's twist before committing to a load.
Do I need a special seating stem for the A-Tip Match bullets?
Yes. Hornady recommends using a dedicated A-Tip seating stem for optimal seating, since the long aluminum tip doesn't seat well with standard stems. It helps you seat the bullet without deforming or marring that precision tip.
Why does each box come with a polishing bag?
A-Tips are packaged sequentially right off the press without being bulk washed or tumbled, which leaves a thin oil film on the bullets. The included polishing bag lets you buff them clean before loading. This hands-off process is exactly what keeps every bullet in the box so uniform.
Are these loaded cartridges or just the bullets?
These are component bullets only, meant for handloading. The box contains 100 projectiles with no case, powder, or primer. You'll be building your own loads with these.





Reviews
There are no reviews yet.