Description
The 225 grain ELD Match sits near the top of Hornady's .30 caliber match lineup, and it earns that spot. This is a heavy, high-BC projectile built for handloaders who want to wring every bit of performance out of a .308 diameter bore at distance. The headline number is a G1 ballistic coefficient of .777 (G7 of .391), which puts it in rarified company for flat trajectory and wind resistance when you get out past 600 and into the 1,000-plus game.
What makes it work is the Heat Shield tip. Conventional polymer tips can soften from the friction heat of flight, which deforms the meplat and quietly eats into the BC on the way out. Hornady went with a heat-resistant polymer that holds its tip shape bullet to bullet and lot to lot, so your trajectory stays predictable round after round. Underneath the tip you've got a swaged lead core and an AMP (Advanced Manufacturing Process) jacket built for concentricity, wrapped up in an optimized secant ogive and boattail profile.
Why the 225 gr ELD Match Runs With Doppler-Verified BCs
Hornady measures these ballistic coefficients with Doppler radar and corrects them to standard atmospheric conditions, rather than relying on calculated estimates. For a long-range handload that matters, because the number you plug into your ballistic solver is the number the bullet actually delivers. That consistency is a big part of why competitive and long-range folks reach for the ELD Match line.
Matching the .308 225 gr ELD Match to Your Barrel
These are heavy for .30 caliber, so twist rate is the thing to check before you buy a box. The 225 is a favorite in the .300 Win Mag, .300 PRC, and other fast cases where there's enough velocity to make the most of that BC. A 1:10 twist will generally stabilize it, though a 1:9 or 1:8 gives you more margin and tends to tighten things up, especially at extended range. This is a component bullet only and comes unloaded, ready for your own load workup.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 30904
- UPC: 090255309041
- Bullet Caliber: .30 Caliber
- Bullet Diameter: .308"
- Bullet Weight: 225 Grain
- Bullet Style: ELD Match Polymer Tip Boat Tail
- Tip Material: Heat Shield Polymer
- Jacket Material: AMP
- Core Material: Lead
- G1 Ballistic Coefficient: .777
- G7 Ballistic Coefficient: .391
- Sectional Density: .339
- Cannelure: No
- Quantity: 100 Per Box
- Application: Target / Match
What’s Included
- 100 Hornady .30 Caliber (.308) 225 grain ELD Match bullets (unloaded component projectiles)
Frequently Asked Questions
What twist rate do I need to stabilize the 225 grain ELD Match?
This is a long, heavy .30 caliber bullet, so it wants a reasonably fast twist. A 1:10 will typically stabilize it, but a 1:9 or 1:8 barrel gives you better margin and usually tighter groups, especially at longer distances. Always confirm your specific barrel's twist before committing to a box.
Is the Hornady 225 gr ELD Match a loaded cartridge or just the bullet?
This is a component bullet only, sold as 100 projectiles per box with no case, powder, or primer. It's meant for handloaders building their own ammunition. You'll need to work up a safe load using published reloading data for your cartridge.
What cartridges is the .308 225 gr ELD Match good for?
It really shines in fast, high-capacity thirties like the .300 Win Mag and .300 PRC where there's enough velocity to take advantage of the high BC. Published load data also exists for cases like the .300 Norma Mag and .300 RUM. It's on the heavy end for a standard .308 Winchester, so twist rate and velocity are the limiting factors there.
Why does the Heat Shield tip matter on the ELD Match?
Standard polymer tips can soften from aerodynamic heating during flight, which deforms the meplat and reduces the ballistic coefficient. The Heat Shield tip uses a heat-resistant polymer that holds its shape, keeping the BC consistent from bullet to bullet and lot to lot. That translates to more predictable trajectories at long range.





Reviews
There are no reviews yet.