0
0

Hornady MonoFlex .30 Cal 140 gr Bullets 50 ct (30310)

UPC: 090255303100

$50.99

82 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady MonoFlex .30 Cal 140-grain bullet is a monolithic, lead-free projectile built for hunters who want a copper-alloy option that holds together and penetrates deep. It measures .308 in diameter and carries a sectional density of .211 with a G1 ballistic coefficient of .277, making it a strong match for the .30-30 Winchester and other .30-caliber lever cartridges. This box holds 50 bullets ready for your reloading bench.

What Sets the MonoFlex 140-Grain Apart

Hornady built this one by combining the best traits of their GMX and FTX designs. The body is a single piece of copper alloy, which is tougher than pure copper and tends to foul less and run lower pressure than solid copper bullets. Because it won't separate on impact, you can count on it retaining roughly 95% of its original weight when recovered, giving you the kind of deep, straight-line penetration that matters on deer and hogs.

Why the Flex Tip Matters in Lever Guns

The red polymer Flex Tip is the real trick here. It gives the bullet a pointed, aerodynamic profile for a flatter trajectory, but it's safe to stack nose-to-primer inside a tubular magazine. On impact, that tip drives back into the nose cavity to kick off expansion, even at the slower velocities you run into at longer distances from a lever gun. A secant ogive profile rounds out the design and helps squeeze flat trajectories out of cartridges like the .30-30.

Loading the Hornady MonoFlex 140 gr

Handloaders have had good luck pushing these in the .30-30 and similar cases, with reported velocities in the 2,400 fps range from typical carbine barrels and solid accuracy to match. Keep in mind this is a copper-alloy bullet, so work up your loads carefully and lean on current published data for the right powder and seating depth. For anyone hunting country where a non-lead projectile is the way to go, the MonoFlex is one of the better-performing choices you can seat in a .30-caliber case.

Key Specifications

  • Manufacturer: Hornady
  • Model: MonoFlex
  • Manufacturer Part Number: 30310
  • UPC: 090255303100
  • Bullet Caliber: .30 Caliber
  • Bullet Diameter: .308"
  • Bullet Weight: 140 Grain
  • Bullet Type: MonoFlex (Monolithic, Flex Tip)
  • Tip Material: Polymer
  • Core / Construction: Copper Alloy (Lead-Free)
  • Ballistic Coefficient (G1): .277
  • Sectional Density: .211
  • Profile: Boat Tail, Secant Ogive
  • Quantity: 50 Per Box
  • Application: Medium to Large Game

What’s Included

  • 50 Hornady MonoFlex .30 Cal 140 gr bullets (component projectiles, not loaded ammunition)

Frequently Asked Questions

What cartridges are the Hornady MonoFlex 140 gr bullets made for?

These .308 diameter, 140-grain bullets are designed first and foremost for the .30-30 Winchester and lever-action hunting. That said, handloaders also run them in other .30-caliber cases like the .300 Savage and various wildcats. Since it's a copper-alloy bullet, always build your loads using current published reloading data for your specific cartridge.

Is the MonoFlex safe to load in a tubular magazine?

Yes. The polymer Flex Tip gives the bullet a pointed profile while staying safe to stack in a tubular magazine, so there's no risk of a point setting off the primer ahead of it under recoil. That's the whole reason Hornady developed the Flex Tip in the first place.

Why choose a copper-alloy MonoFlex over a traditional lead-core bullet?

The MonoFlex is a monolithic copper-alloy bullet, so it won't separate on impact and typically retains around 95% of its weight for deep, consistent penetration. The copper alloy is tougher than pure copper and tends to foul less and run lower pressure. It's also a lead-free option for hunters who want or need a non-lead projectile.

Does this box come as loaded ammunition or component bullets?

This is a 50-count box of component bullets for reloading, not finished cartridges. You'll need your own brass, powder, and primers to build loads. The bullet features a copper-alloy body and a red polymer Flex Tip over a boat-tail base.

Additional information

UPC

090255303100

Manufacturer

Manufacturer Part Number

30310

Bullet Caliber

.30 Caliber

Quantity

50 Per Box

Shipping Weight

1.0688

Reviews

There are no reviews yet.

Be the first to review “Hornady MonoFlex .30 Cal 140 gr Bullets 50 ct (30310)”