Description
If you cast your own .32 caliber or 8mm bullets, gas checks are one of the cheapest ways to get real improvement out of your loads. These copper checks from Hornady fit the base of your cast lead bullet and lock on during the sizing step, forming a protective cap that keeps hot propellant gases from cutting into soft lead. That means less deformation at the base, cleaner barrels, and the ability to push cast bullets to velocities that would otherwise leave your bore caked with lead.
How the Hornady .32 Cal Gas Checks Go On
These are the crimp-on style, so they do more than just sit on the shank. You seat a check on the base of a gas-check-designed bullet, then run it through your lube-sizer or push-through sizing die. As the bullet is sized, the check crimps down tight and squares up against the base. A lot of casters like to seat and crimp in the same stroke, while others prefer to snap the checks on a batch of bullets first and then size them all in a second pass for a smoother rhythm. Either way, the check needs to end up fully seated and the same diameter as the bullet so it seals properly.
Why Bullet Casters Reach for the Hornady 8mm Checks
The payoff is in the shooting. A good gas check lets a cast bullet run harder without gas cutting and lead fouling, which keeps your barrel cleaner and your groups tighter over a long session. Hornady has been the go-to name here for decades, and these copper checks have a well-earned reputation for consistency from one to the next.
Keep in mind these are built for bullets cast with a gas-check base, meaning the shank is turned down to accept the check. They won't crimp onto a plain-base bullet. For the right mold, this box of 1000 covers a lot of loading sessions and is a smart thing to keep stocked on the bench alongside your lube and sizing dies.
Key Specifications
- Caliber: .32 Cal / 8mm
- Type: Crimp-On Gas Checks
- Material: Copper
- Quantity: 1000 per box
- Manufacturer: Hornady
- Manufacturer Part Number: 7080
- UPC: 090255270808
- Country of Origin: United States
- Shipping Weight: 0.7063 lbs
What’s Included
- 1000 Hornady .32 cal / 8mm crimp-on gas checks
Frequently Asked Questions
What kind of bullets do these Hornady .32 cal gas checks work with?
They're made for cast bullets that have a gas-check base, meaning the shank at the bottom is turned down slightly to accept the check. They crimp on during sizing and will not fit a plain-base bullet. Make sure your mold is a gas-check design before ordering.
How do you install the crimp-on gas checks?
You seat a check on the base of the bullet, then run the bullet through a lube-sizer or push-through sizing die. As the bullet is sized, the check crimps tight and squares against the base. Many casters snap checks onto a batch of bullets first and then size them all in one pass to speed things up.
Do gas checks really reduce leading in the barrel?
Yes. The copper check caps the soft lead base and seals out hot powder gases that would otherwise cut into the bullet and smear lead down your bore. That lets you run cast bullets at higher velocities with less fouling and more consistent accuracy.
How many .32 cal gas checks come in this box?
This is the 1000 count box, which is the standard package for this item. That's plenty to cover a long run of cast bullets and makes a handy thing to keep stocked on the reloading bench.



Reviews
There are no reviews yet.