0
0

Hornady 6.5mm Crimp-On Gas Checks, 1000 Count (.264 Dia) #7040

UPC: 090255270402

$48.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you cast your own 6.5mm bullets, gas checks are one of those small parts that make a real difference once your velocities climb. These Hornady crimp-on checks are stamped from corrosion-resistant copper and sized to fit the gas check shank on .264 diameter cast bullets. As the bullet runs through your sizing die, the check expands and crimps onto the base, forming a tight seal that protects the soft lead from the hot, high-pressure gas behind it.

What the Hornady 6.5mm Gas Checks Do at the Bench

The crimp-on design is the reason these stay put. The tapered sidewall grips the shank during sizing, so the check doesn't walk off or slip once it's seated. That sealed base does two jobs at once: it keeps gas from cutting into the bullet base and it knocks down lead fouling in the bore, which means less scrubbing between range trips and better, more consistent accuracy over a string.

Matching the 6.5mm Crimp-On Gas Checks to Your Bullets

One thing worth knowing before you order is that gas checks only work on bullets cast with a gas check shank, that small stepped-down section at the base. Plain-base and bevel-base bullets won't hold one. These are the right call for rifle loads where you're pushing cast bullets into higher velocity territory, roughly north of 1,600 to 1,800 fps, where a bare lead base would start to lead up the barrel. A lot of casters run them regardless just because the rifle groups better with them on.

You'll install these during the normal lube-and-size step with a sizing die or lube-sizer set up for the correct diameter. Each box holds 1,000 checks, which is enough to keep a dedicated 6.5mm caster busy through plenty of loading sessions. Made in the USA, part number 7040.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 7040
  • UPC: 090255270402
  • Caliber: 6.5mm (.264 Diameter)
  • Type: Crimp-On Gas Check
  • Material: Copper
  • Color: Copper
  • Quantity: 1000 per box
  • Country of Origin: USA
  • Shipping Weight: 0.3 lb

What’s Included

  • 1,000 Hornady 6.5mm (.264) crimp-on gas checks

Frequently Asked Questions

Will these 6.5mm gas checks fit any cast bullet?

No, they only work on bullets cast with a gas check shank, which is the small stepped-down section at the base. Plain-base and bevel-base bullets won't hold a check. If your mold is a gas check design and throws a .264 bullet, these are the match.

How do I install the Hornady crimp-on gas checks?

You seat them during the normal lube-and-size step. Set the check on the bullet base, then run the bullet through a sizing die or lube-sizer set for the correct diameter, and the check crimps on as the bullet passes through. The tapered sidewall grips the shank so it stays put through firing.

When do I actually need gas checks on my 6.5mm cast loads?

Most casters add them as velocities climb into higher rifle territory, generally past the 1,600 to 1,800 fps range, where a bare lead base starts to gas-cut and foul the bore. Below that, a properly sized and lubed bullet often runs clean without one. That said, plenty of shooters run checks across the board because their rifle simply groups tighter with them on.

Do these gas checks help reduce lead fouling?

Yes. By sealing the base against hot gas, the check keeps the soft lead from being cut and smeared into the bore. That means less lead buildup in the barrel, easier cleaning, and more consistent accuracy over a string of shots.

Additional information

UPC

090255270402

Manufacturer

Manufacturer Part Number

7040

Quantity

1000

Shipping Weight

0.3

Reviews

There are no reviews yet.

Be the first to review “Hornady 6.5mm Crimp-On Gas Checks, 1000 Count (.264 Dia) #7040”