0
0

Hornady ELD Match 6.5mm .264 147 gr Reloading Bullets 100ct

UPC: 090255263336

$40.99

84 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 147 grain ELD Match is one of Hornady's heavier 6.5mm projectiles, and it's earned a loyal following among precision reloaders working with the 6.5 Creedmoor, 6.5 PRC, and other .264 caliber cartridges. At 147 grains with a .264 diameter, this bullet pairs a high sectional density of .301 with a streamlined secant ogive and boat tail design, giving it a G1 ballistic coefficient of .697 and a G7 of .351. That's a bullet built to buck the wind and stay supersonic well past the ranges where lighter projectiles start to fall apart.

What Makes the ELD Match 147 Grain Different

The standout feature is the Heat Shield tip. Standard polymer tips can soften and deform from the friction heat generated in flight, which throws off the bullet's meplat and hurts consistency downrange. The Heat Shield material resists that aerodynamic heating and keeps the tip shape uniform from the muzzle all the way to the target. Under the surface you get highly concentric AMP jackets and a precision swaged lead core, both of which feed directly into the tight bullet-to-bullet uniformity this line is known for.

Dialing In Your 6.5mm Handloads

Hornady recommends a minimum 1:8 twist rate to properly stabilize the 147 grain ELD Match, so it's worth checking your barrel before you commit a stack of these to load development. Because the BCs are measured with Doppler radar and corrected to standard atmospheric conditions, the numbers on the box reflect real-world flight rather than estimated figures, which makes building accurate drop charts a whole lot easier. Reloaders running this bullet in 6.5 Creedmoor commonly pair it with Lapua brass and a suitable powder charge to chase that half-MOA accuracy the cartridge is famous for.

These are component bullets only, not loaded ammunition, so they're meant for folks who roll their own. If you're after a heavy-for-caliber match projectile that rewards careful load work with repeatable results, the 147 grain ELD Match is a proven choice.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 26333
  • Model: ELD Match
  • UPC: 090255263336
  • Caliber: 6.5mm (.264)
  • Bullet Weight: 147 Grain
  • Bullet Diameter: .264 in
  • Bullet Type: Extremely Low Drag-Match, Polymer Tip Boat Tail
  • Ballistic Coefficient: .697 (G1) / .351 (G7)
  • Sectional Density: .301
  • Recommended Twist Rate: 1:8 minimum
  • Tip Material: Heat Shield Polymer
  • Jacket: AMP (Advanced Manufacturing Process)
  • Quantity: 100 per box
  • Application: Target / Match

What’s Included

  • 100 Hornady 6.5mm .264 147 gr ELD Match component bullets

Frequently Asked Questions

What twist rate do I need to stabilize the 147 grain ELD Match?

Hornady lists a 1:8 twist as the minimum recommended rate for this bullet. The 147 grain is heavy for the 6.5mm caliber, so a faster twist helps keep it stable in flight. If your barrel is 1:8 or faster you should be in good shape, but it's worth confirming before load development.

Are these loaded cartridges or just the bullets?

These are component bullets only, meaning the projectiles by themselves with no case, powder, or primer. They're intended for handloaders assembling their own ammunition. If you want factory loaded rounds, you'd want Hornady's loaded Match ammunition instead.

What's the difference between the Heat Shield tip and a standard polymer tip?

The Heat Shield tip is made from a material that resists the aerodynamic heating a bullet experiences at speed. Standard polymer tips can soften and lose their shape in flight, which affects the meplat and consistency. Holding that tip shape helps the ELD Match maintain its high ballistic coefficient and outperform traditional boat tail hollow point designs.

What cartridges can I load the 6.5mm 147 grain ELD Match in?

This .264 diameter bullet works in any 6.5mm cartridge that can stabilize a 147 grain projectile, including the 6.5 Creedmoor, 6.5 PRC, .260 Remington, and 6.5×55 Swedish. It's a popular heavy-for-caliber choice for long-range target and match work. Just make sure your twist rate and load data support the bullet weight.

Additional information

UPC

090255263336

Manufacturer

Manufacturer Part Number

26333

Bullet Caliber

6.5mm

Caliber/Gauge

6.5MM

Grains

147Gr

Length

4.2500

Model

Product Type

ELD Match

Quantity

100

Shipping Weight

2.2

Units per Box

100

Reviews

There are no reviews yet.

Be the first to review “Hornady ELD Match 6.5mm .264 147 gr Reloading Bullets 100ct”