Description
The Hornady 140 grain ELD Match in 6.5mm is the bullet that helped make the whole .264 caliber precision scene what it is today. It's a polymer-tipped boattail designed from the ground up for target and competition work, pairing a streamlined secant ogive with a high ballistic coefficient so it holds velocity and bucks wind better downrange. These are component bullets for reloading, not loaded ammo, so you'll be building your own rounds around them.
The headline feature is the Heat Shield tip. Unlike standard polymer tips that can soften and deform from the heat of flight, this one resists aerodynamic heating and keeps its shape, which means the meplat stays consistent from the muzzle all the way to the target. That translates to a more predictable drag profile shot to shot. Hornady backs that up with Doppler radar, measuring the BCs under real conditions and correcting them to standard atmosphere, so the .646 G1 and .326 G7 numbers you're working with in your ballistic app are the real deal.
What Makes the 140 ELD-M Tick
Underneath the tip you've got a swaged lead core for balance and uniformity, wrapped in Hornady's highly concentric AMP jacket. Concentricity is a big deal with match bullets, and the tighter that jacket runs, the more consistent your bullet is spinning down the bore. The 140 grain weight hits a sweet spot a lot of folks like: enough mass to carry a strong sectional density of .287, but not so heavy that it slows your velocity to a crawl.
Loading the ELD Match in Your 6.5
This bullet has a long track record in the 6.5 Creedmoor, 6.5×47, .260 Remington, 6.5 PRC and just about any .264 you can name. Handloaders commonly pair it with powders like H4350 and IMR 4350, and plenty of competition folks report groups well under half an inch once they dial in their charge and seating depth. It's also known for being fairly jump tolerant, which makes load development less of a headache. As always, start low and work up to find what your rifle likes best.
Key Specifications
- Manufacturer: Hornady
- Model: ELD-M (ELD Match)
- Manufacturer Part Number: 26331
- UPC: 090255263312
- Bullet Caliber: 6.5mm (.264)
- Bullet Diameter: .264"
- Bullet Weight: 140 Grains
- Bullet Style: Polymer Tipped Boattail
- Tip Material: Heat Shield Polymer
- Jacket: AMP (highly concentric)
- Core Material: Swaged Lead
- Ballistic Coefficient (G1): .646
- Ballistic Coefficient (G7): .326
- Sectional Density: .287
- Cannelure: No
- Quantity: 100 Per Box
What’s Included
- 100 Hornady 6.5mm (.264) 140 grain ELD Match component bullets
Frequently Asked Questions
Are these Hornady ELD-M 140 grain loaded rounds or just the bullets?
These are component bullets only, meaning just the projectiles for handloading. There's no brass, powder, or primers in the box. You'll be seating these into your own prepped cases to build finished ammunition.
What's the ballistic coefficient on the 140 ELD-M?
Hornady lists a .646 G1 BC and a .326 G7 BC for this bullet, along with a .287 sectional density. Those BCs are measured with Doppler radar and corrected to standard atmosphere, so they're verified numbers rather than estimates. That high BC is a big part of why this bullet holds velocity and resists wind so well at distance.
What cartridges can I load the 6.5mm 140 grain ELD-M in?
Any .264 caliber rifle cartridge is fair game. It's hugely popular in the 6.5 Creedmoor, but it also works great in the 6.5×47 Lapua, .260 Remington, 6.5 PRC, and others. The 140 grain weight is a well-rounded choice for both precision target work and long-range use.
Is the 140 ELD-M easy to work up a load for?
It has a reputation for being fairly jump tolerant, which tends to make load development go smoother. Many reloaders pair it with powders like H4350 or IMR 4350 and find accurate loads without a lot of fuss. Always start with a reduced charge and work up carefully while watching for pressure in your specific rifle.






Reviews
There are no reviews yet.