Description
Hornady took some of the most trusted match bullet profiles in the industry and made them their own with the Aeromatch line. These are 6.5mm .264 diameter projectiles weighing 140 grains in a hollow point boat tail design, built for handloaders chasing tight groups at distance. If you already shoot a popular 140 class match bullet in your 6.5 Creedmoor, 6.5 PRC, or 6.5×55, these will feel familiar right out of the box.
What the Aeromatch 140 Grain Brings to the Bench
The numbers here are what precision reloaders care about. These bullets carry a .608 G1 ballistic coefficient and a .287 sectional density, which means they buck the wind well and hold velocity downrange. The hollow point boat tail profile is the classic recipe for long range accuracy, and Hornady recommends a minimum 1-8 inch twist to get the most out of them. For the vast majority of modern 6.5 Creedmoor and 6.5 PRC barrels, that twist rate is already covered.
Why Handloaders Are Reaching for the 6.5mm Aeromatch
The real selling point is the seamless transition. Because Hornady built these around established match profiles, there's no need to rework your load data, reset your dies, or re-enter numbers into your ballistic solver. You can swap them in and keep your proven recipe running. That makes them a smart pick for load development, high volume practice, or stocking up for match season without reinventing your process.
Each box holds 100 bullets, which is a practical amount for working up loads or keeping your range sessions going. These are target and match projectiles through and through, so expect consistency from one bullet to the next when you're trying to shrink a group or stretch your effective distance.
Key Specifications
- Manufacturer: Hornady
- Model: Aeromatch
- Manufacturer Part Number: 26303
- UPC: 090255263039
- Caliber: 6.5mm / .264
- Bullet Diameter: .264 in
- Bullet Weight: 140 gr
- Bullet Type: Hollow Point Boat Tail (HPBT)
- Ballistic Coefficient (G1): 0.608
- Sectional Density: 0.287
- Minimum Recommended Twist Rate: 1-8 in
- Application: Target / Match
- Quantity: 100 per box
- Material: Lead core
What’s Included
- 100 Hornady Aeromatch 6.5mm .264 140 gr HPBT bullets
Frequently Asked Questions
What ballistic coefficient do the Hornady Aeromatch 140 grain bullets have?
These 6.5mm Aeromatch bullets carry a G1 ballistic coefficient of .608 along with a .287 sectional density. Those numbers put them right in line with the popular 140 class match bullets handloaders already rely on for long range work. It's a profile built to fight the wind and hold velocity downrange.
Do I need to change my load data to switch to the Aeromatch 6.5mm bullets?
That's the whole idea behind this line. Hornady built the Aeromatch around established match profiles, so you can keep your existing load data, die settings, and ballistic solver info the same. Still, always work up any new bullet carefully and confirm your results, since every barrel is a little different.
What twist rate do these 6.5mm 140 grain bullets need?
Hornady lists a 1-8 inch twist as the minimum recommended rate to properly stabilize these 140 grain projectiles. Most modern 6.5 Creedmoor and 6.5 PRC barrels come with a 1-8 twist or faster, so they're a natural fit. If you're shooting an older or slower twist barrel, check your spec before loading.
Are the Hornady Aeromatch bullets good for 6.5 Creedmoor?
They're an excellent match for the 6.5 Creedmoor since it's one of the most common homes for a 140 grain HPBT. The same goes for cartridges like the 6.5 PRC, .260 Remington, and 6.5×55 Swede. These are target and match projectiles, so they shine when you're chasing accuracy rather than hunting performance.




Reviews
There are no reviews yet.