Description
These Hornady SST bullets are .264 diameter 6.5mm component projectiles made for handloaders chasing deer and similar-sized game. At 129 grains with a G1 ballistic coefficient of .485 and a sectional density of .264, they strike a nice balance between flat trajectory and downrange punch. The sharp polymer tip boosts the BC and acts like a wedge on impact, driving into the lead core to kick off fast, reliable expansion even at the longer ranges where velocity starts to drop off.
What Sets the 6.5mm SST Apart
The heart of this bullet is Hornady's InterLock ring, a raised band inside the jacket that mechanically locks the jacket and lead core together. That keeps the two from separating during expansion, so you hold onto mass and energy for deeper penetration and better odds of a pass-through. The jacket is beefed up in key areas to keep expansion controlled rather than letting the bullet come apart too quickly, which is a common gripe with some tipped hunting bullets.
Loading the 129gr SST .264
The secant ogive and boat-tail profile cut drag and help these seat and feed cleanly in most 6.5mm chamberings, from 6.5 Creedmoor to .260 Rem and the .264 magnums. A mid-body cannelure gives you a clean spot to crimp and works alongside the InterLock ring to keep everything together under recoil and on impact. Keep in mind these are component bullets only, not loaded ammunition, so you'll be supplying your own brass, powder, and primers.
Field Performance of the SST 6.5mm
Hunters reach for the 129gr SST because it shoots flat and hits hard on whitetails, antelope, hogs, and comparable game. The quick, violent expansion opens up a large wound channel for fast, clean results, while the locked core keeps the bullet driving through. If you're working up an accurate hunting load for a 6.5, this is a proven, dependable projectile that tends to group well across a range of rifles.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 26202
- UPC: 090255262025
- Bullet Type: SST (Super Shock Tip)
- Caliber: 6.5mm
- Bullet Diameter: .264"
- Bullet Weight: 129 Grain
- Ballistic Coefficient (G1): .485
- Sectional Density: .264
- Profile: Secant Ogive, Boat-Tail
- Tip Material: Polymer
- Core Material: Lead
- Jacket Material: Copper
- Cannelure: Yes
- Quantity: 100 Per Box
- Application: Medium Game
What’s Included
- 100 Hornady SST 6.5mm .264 129gr component bullets
Frequently Asked Questions
Are these Hornady SST 6.5mm 129gr bullets loaded ammunition?
No, these are component bullets for handloading, not loaded ammo. You'll need to supply your own brass, powder, and primers to build a complete cartridge. They're meant for reloaders assembling their own 6.5mm rounds.
What cartridges can I load the 129gr SST .264 bullet in?
Any 6.5mm/.264 caliber cartridge works, including 6.5 Creedmoor, .260 Remington, 6.5×55 Swede, 6.5 PRC, and the .264 and 6.5mm magnums. Always check a current reloading manual for the right load data for your specific cartridge and rifle. The secant ogive boat-tail profile seats cleanly across most of these chamberings.
What game is the 6.5mm SST 129gr best suited for?
It's built for medium-sized game in the roughly 50 to 300 pound range, so think whitetails, antelope, hogs, and similar animals. The polymer tip drives fast expansion while the InterLock ring keeps the core and jacket together for solid penetration. Flat trajectory and a .485 BC make it a strong pick for open-country hunting.
What is the ballistic coefficient of this 129gr SST bullet?
This bullet carries a G1 ballistic coefficient of .485 with a sectional density of .264. That combination helps it buck wind and hold velocity downrange, giving you flatter trajectories and more retained energy at distance.




Reviews
There are no reviews yet.