Description
The Hornady ELD-VT in 25 caliber is a bit of a crossover projectile, and that's the whole point. It takes the long, aerodynamic shape of a match bullet and marries it to the light weight and high speed you want out of a varmint round. The result is a .257-diameter, 95-grain bullet that shoots flat, bucks the wind, and comes apart in a hurry when it reaches the target. ELD-VT stands for Extremely Low Drag Varmint/Target, and this component gives you a 100-count box to load up for whatever your .25 cal throws at you, whether that's a 25-06, 257 Roberts, 25 Creedmoor, or similar.
What Makes the 95gr ELD-VT Tick
Hornady builds this bullet around a long ogive match jacket with the lead core seated at a reduced height. That leaves a large air cavity up front and shifts the center of gravity rearward, which helps dynamic stability while setting up fast expansion. On impact, the polymer tip is driven back into the core and causes rapid, dramatic fragmentation, even at lower velocities. For varmint work that means dropping targets in a hurry, and for the target crowd it means a bullet with a serious ballistic coefficient. This one carries a G1 BC of .433 and a sectional density of .205.
Heat Shield Tip and AMP Jacket
The Heat Shield tip is the same proven piece found across Hornady's ELD lineup. It resists the aerodynamic heating that softens ordinary polymer tips during flight, so the bullet holds its shape and keeps drag low all the way downrange. Backing that up is the AMP jacket, built with tight control over concentricity and wall thickness so every bullet in the box runs the same as the one before it. That bullet-to-bullet uniformity is exactly what you're chasing when you're trying to shrink groups.
Dialing In Your Load
These are long, high-BC bullets, so twist rate matters. Hornady lists a recommended 1:8 twist to keep the 95-grain ELD-VT stable, and many fast-twist .25 cal barrels handle it well. Start low, work up, and check your published load data for your specific cartridge. With the right powder charge and a decent barrel, this bullet rewards careful handloaders with flat trajectories and tight groups.
Key Specifications
- Manufacturer: Hornady
- Model: ELD-VT
- Manufacturer Part Number: 25412
- UPC: 090255254129
- Caliber: .25 Caliber
- Bullet Diameter: .257"
- Bullet Weight: 95 Grain
- Bullet Type: ELD-VT Polymer Tip Boat Tail
- Ballistic Coefficient (G1): .433
- Sectional Density: .205
- Recommended Twist Rate: 1:8"
- Quantity: 100 per box
- Country of Origin: USA
What’s Included
- 100 Hornady ELD-VT 25 Cal .257 95 gr bullets
Frequently Asked Questions
What cartridges can I load the Hornady ELD-VT 95gr .257 bullets in?
These are .257-diameter component bullets, so they work in any .25 caliber cartridge you handload, including the 25-06 Remington, 257 Roberts, 25 Creedmoor, and 257 Weatherby. You'll just need to pull published load data for your specific cartridge. Keep in mind these are bullets only, not loaded ammunition.
What barrel twist does the 95gr ELD-VT need to stabilize?
Hornady recommends a 1:8 twist as the minimum to keep the 95-grain ELD-VT stable, since it's a long, high-BC bullet. Plenty of modern fast-twist .25 cal barrels will run it well. If you're on the edge, checking the 4DOF solver can help confirm stability for your exact setup.
What makes the ELD-VT different from a V-Max?
Both use a Heat Shield polymer tip for low drag, but the ELD-VT is built on a longer, match-style ogive with the core seated low to create a big air cavity up front. That gives it a higher ballistic coefficient while still delivering rapid fragmentation. It's designed to pull double duty between serious varmint work and long-range target shooting.
How does the Hornady ELD-VT fragment on impact?
On impact the polymer tip gets driven rearward through the air gap and into the bullet core, which triggers rapid and dramatic fragmentation. Hornady designed it to come apart even at lower velocities, so it still performs out at distance. That's what makes it a strong pick for varmints and predators.




Reviews
There are no reviews yet.