Description
The Hornady CX 6mm (.243) 90-grain bullet is a monolithic copper alloy projectile built for hunters who want deep penetration and reliable terminal performance without lead. Since it's machined from a single piece of copper, there's no core and jacket to come apart on impact. That design translates to around 95% weight retention, so the bullet punches through and keeps doing work even when it hits heavy bone or passes through at steep angles.
What Sets the CX 6mm Apart
The standout feature here is the Heat Shield tip. It's made from a heat-resistant polymer that stands up to the friction and heating a bullet sees in flight, which keeps the meplat consistent and the ballistic coefficient steady from muzzle to target. This 90-grain load carries a .418 G1 BC and a .195 sectional density, a solid combination for a 6mm that helps it buck wind and hold velocity downrange. The optimized groove geometry cut into the shank reduces bearing surface and fouling, so you get cleaner barrels and good aerodynamic performance round after round.
Loading the CX 6mm in Your Rifle
These are component bullets for handloaders, not loaded ammunition, so you'll be seating them in your own brass. Hornady recommends a 1-8" twist to properly stabilize this 90-grain projectile, which most modern 6mm Creedmoor, 6mm Remington, and faster-twist .243 Winchester barrels will handle. Keep in mind monolithic copper bullets tend to run a bit longer than lead-core bullets of the same weight, so start low and work up your load while watching your seating depth.
Because the CX is fully lead-free, it's a great fit for hunters heading into areas that call for nontraditional bullets. From deer and antelope on up to larger medium game, this is a dependable, accurate choice that gives you flat trajectories and the kind of consistent expansion you want when it counts.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 24444
- UPC: 090255244441
- Model: CX (Copper alloy eXpanding)
- Caliber: 6mm (.243)
- Bullet Diameter: .243"
- Bullet Weight: 90 grain
- Bullet Type: Copper Solid, Heat Shield polymer tip
- Ballistic Coefficient (G1): .418
- Sectional Density: .195
- Weight Retention: 95%
- Recommended Twist Rate: 1-8"
- Lead Free: Yes
- Quantity: 50 per box
- Overall Length: 2.55"
What’s Included
- 50 Hornady CX 6mm (.243) 90gr copper bullets
Frequently Asked Questions
Are the Hornady CX 6mm bullets loaded ammo or component bullets?
These are component bullets meant for reloading, not loaded cartridges. You'll seat them in your own brass with your choice of powder and primer. Each box holds 50 projectiles.
What twist rate do I need to stabilize the 90gr CX in 6mm?
Hornady recommends a 1-8" twist barrel to properly stabilize this 90-grain bullet. Most modern 6mm Creedmoor barrels and faster-twist .243 Winchester rifles fall right in that range. Slower twist barrels may struggle to stabilize this longer monolithic bullet.
What makes the CX different from a standard lead-core bullet?
The CX is machined from a single piece of copper alloy, so there's no core and jacket that can separate on impact. That construction gives it roughly 95% weight retention and deep, straight-line penetration. It's also completely lead-free, which makes it a good choice for areas that require nontraditional bullets.
What game is the 90gr 6mm CX suited for?
This bullet is built for everything from medium-size to larger game, so it works well on deer, antelope, and similar animals. Its combination of controlled expansion and high weight retention means dependable terminal performance across a range of impact velocities.




Reviews
There are no reviews yet.