Description
When you're chasing tiny groups at extreme distance with a .375, the bullet choice matters as much as the rifle. The Hornady A-Tip Match .375 Cal 390 grain is built for exactly that kind of work, pairing a heavy projectile with a sky-high ballistic coefficient of .987 G1 and .497 G7. Hornady developed it through years of testing by their Ballistic Development Group, and the result is a match bullet that holds velocity, bucks wind, and stays predictable all the way downrange.
Unlike mono-metal turned solids, this one uses three components working together: a gilding metal jacket, a lead core, and that signature precision-machined aluminum tip. The aluminum tip is longer and heavier than a typical polymer tip, which shifts the center of gravity rearward and sharpens in-flight stability. That translates to tighter groups and reduced drag variability shot to shot, which is what you want when every click counts.
What Sets the A-Tip Match .375 Apart
The low drag coefficient here was verified by Doppler radar, so the BC numbers aren't marketing fluff. These bullets are forgiving of small changes in twist rate, seating depth, and muzzle velocity, which makes load development a little less painful. Hornady also packages them sequentially, one clone after another, with minimal handling off the press to keep each projectile as close to identical as possible.
Loading the 390 Grain A-Tip Match
Hornady recommends a 1:11 twist rate to stabilize this 390 grain .375 pill, and the sectional density of .396 helps it retain energy and resist wind drift. A dedicated A-Tip seating stem is recommended for best results since the long aluminum tip seats a little differently than polymer-tipped bullets. The box ships with a polishing bag to prep the bullets before loading, which is a nice touch for anyone fussy about their process. This is a target and match component, meant for handloaders building precision rounds rather than hunting loads.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 3729
- UPC: 090255237290
- Caliber: .375 (375 Cal)
- Bullet Diameter: .375 in
- Bullet Weight: 390 Grain
- Bullet Type: A-Tip Match
- Bullet Tip Material: Aluminum
- Jacket Material: Copper (gilding metal)
- Core Material: Lead
- Ballistic Coefficient: .987 (G1), .497 (G7)
- Sectional Density: .396
- Recommended Twist Rate: 1:11
- Application: Target / Match
- Quantity: 25 Per Box
What’s Included
- 25 Hornady A-Tip Match .375 Caliber 390 grain bullets
- Polishing bag for prepping bullets before loading
Frequently Asked Questions
What twist rate does the Hornady A-Tip Match .375 390 grain need?
Hornady recommends a 1:11 twist rate to properly stabilize this 390 grain .375 bullet. Faster twists in the 1:8 to 1:10 range can work but may require some extra attention during load development. Matching the right twist keeps these long, high-BC projectiles flying true at distance.
Do I need a special seating stem for the A-Tip Match bullets?
Yes, Hornady recommends using a dedicated A-Tip seating stem for best results. The aluminum tip is longer than a standard polymer tip, so a matched stem contacts the bullet correctly and protects both the tip and your seating consistency. It's a small investment that pays off in more uniform cartridge overall length.
Are these bullets loaded ammunition or reloading components?
These are reloading components, not loaded ammo. You get 25 projectiles to assemble your own match rounds using your preferred brass, powder, and primers. They're intended for precision rifle competition and long-range target work.
What makes the A-Tip different from Hornady's ELD Match?
The A-Tip uses a precision-machined aluminum tip instead of a polymer tip, which is longer and heavier and shifts the center of gravity rearward for added in-flight stability. It's also sequentially packaged straight off the press to minimize handling and keep bullets as consistent as possible. The result is a higher-tier match bullet aimed at serious long-range and extreme-distance shooting.




Reviews
There are no reviews yet.