Description
If you handload for an old .303 British Enfield or a 7.7mm Japanese rifle, these Hornady InterLock bullets are about as dependable as it gets. They're a true .312 diameter projectile weighing 174 grains with a round nose profile and an exposed lead tip, built on Hornady's traditional cup and core design. That slightly fatter .312 diameter is worth noting, since a lot of these old service rifles have worn or generous bores that shoot tighter groups with a .312 than they do with a .311.
What Makes the InterLock .303 Bullet Tick
The heart of this bullet is the InterLock ring, a raised ridge inside the jacket that's embedded into the lead core. On impact the exposed tip starts expansion while that ring holds the jacket and core locked together, so you get strong weight retention and a wide, consistent mushroom instead of the core and jacket parting ways. A series of interior grooves weaken the upper section just enough to encourage reliable expansion, and the tapered jacket lets the bullet open up at lower velocities while keeping things in check when speeds run hot. Hornady lists a recommended muzzle velocity window of roughly 2000 to 3300 fps, which fits standard .303 loads nicely.
Loading the 174 gr Round Nose .312 Bullet
These come with a cannelure, so you can apply a solid, repeatable crimp that works alongside the InterLock ring to keep everything together under recoil. The round nose shape feeds smoothly and suits the traditional velocities and twist rates found in .303 British and 7.7mm Japanese rifles. Ballistics-wise you're looking at a G1 ballistic coefficient of 0.262 and a sectional density of 0.255, numbers that translate to good penetration and solid terminal performance on deer-sized and larger game.
If you've been chasing better accuracy out of a well-used milsurp rifle, the heavier 174 grain weight and true .312 diameter are a smart combination worth working into your load development. You get 100 projectiles in the box to build plenty of hunting and range ammo.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 3130
- UPC: 090255231304
- Bullet Line: InterLock
- Caliber: .303 Cal / 7.7mm Japanese
- Bullet Diameter: .312 inch
- Bullet Weight: 174 grain
- Bullet Style: Round Nose (RN)
- Ballistic Coefficient (G1): 0.262
- Sectional Density: 0.255
- Recommended Muzzle Velocity: 2000 to 3300 fps
- Cannelure: Yes
- Quantity: 100 Per Box
What’s Included
- 100 Hornady InterLock .303 Cal .312" 174 gr round nose bullets
Frequently Asked Questions
Will these .312 diameter bullets work in my .303 British Enfield?
Yes, these are made specifically for .303 British and 7.7mm Japanese rifles. The true .312 diameter is often a better match for older or worn Enfield bores than a .311 bullet, and many reloaders report noticeably tighter groups after making that switch. As always, work up your load carefully in your own rifle.
Are the Hornady InterLock 174 gr bullets good for hunting?
They're a solid hunting choice. The InterLock ring keeps the jacket and core locked together for strong weight retention and controlled expansion, which gives you deep penetration and a consistent wound channel on deer-sized and larger game. The 174 grain weight and 0.255 sectional density help carry that energy where it counts.
Do these bullets have a cannelure for crimping?
Yes, these 174 grain round nose bullets feature a cannelure. That lets you apply a firm, repeatable crimp, which works together with the InterLock ring to keep the bullet seated and the core and jacket locked during recoil and expansion.
Are these loaded cartridges or component bullets?
These are component bullets for reloading, not loaded ammunition. You'll need your own brass, primers, and powder to assemble finished cartridges. The box contains 100 projectiles ready for your .303 British or 7.7mm Japanese load development.





Reviews
There are no reviews yet.