Description
Hornady built the A-Tip Match line for handloaders who care about the small stuff. These 76-grain .224 diameter bullets are the result of years of work by the Hornady Ballistic Development Group, and the attention to detail shows up on paper. With a G1 ballistic coefficient of .413 (.208 G7) and a sectional density of .216, this is a heavy-for-caliber projectile that holds velocity downrange and cuts through wind better than lighter .22 bullets.
What Sets the A-Tip Match Apart
The headline feature is that machined aluminum tip. It runs longer than a typical polymer tip, which shifts the center of gravity and helps the bullet settle into flight faster for better stability. The patented DVRT (Drag Variability Reduction Technology) tip uses a flat meplat to tighten up drag uniformity from bullet to bullet, which is what trims dispersion and shrinks groups way out there. Pair that with an AMP jacket known for strong concentricity and a boat tail profile tuned specifically to the .22 caliber, and you've got a bullet engineered front to back for precision.
Consistency You Can Feel in the Box
Hornady sequentially packages these, loading them one clone after another with minimal handling so an entire box stays tight on tolerances. That lot uniformity is a big reason precision reloaders reach for A-Tips. Testing by shooters has backed it up, with measured tip-to-base variation inside half a thousandth and sub-MOA groups turning up early in load development.
Dialing In the 76gr A-Tip Match
These bullets like a fast twist. A 1:8 rate works, and a 1:7 or faster barrel will stabilize them best, making them a natural fit for cartridges like the 22 Creedmoor, 22 ARC, and other fast-twist .224 builds. One thing to note: the A-Tip requires Hornady's dedicated A-Tip seating stem for proper seating, since the long tip won't play nice with a standard stem. Start with Hornady's published load data and work your loads up carefully to find what your rifle likes.
Key Specifications
- Manufacturer: Hornady
- Product Line: A-Tip Match
- Manufacturer Part Number: 22799
- UPC: 090255227994
- Caliber: .22 Cal / .224 Diameter
- Bullet Weight: 76 Grain
- Bullet Style: Aluminum Tip Boat Tail
- Ballistic Coefficient (G1): .413
- Ballistic Coefficient (G7): .208
- Sectional Density: .216
- Recommended Twist Rate: 1:8 or faster (1:7 ideal)
- Application: Target / Match
- Quantity: 100 Count
What’s Included
- 100 Hornady A-Tip Match 22 Cal .224 76gr bullets
Frequently Asked Questions
Do I need a special seating stem for the A-Tip Match bullets?
Yes. Hornady recommends their dedicated A-Tip seating stem for proper seating. The aluminum tip is longer than a standard polymer tip, so a regular seating stem won't contact the bullet correctly and can mar or inconsistently seat it. The right stem is what keeps your seating depth uniform across the box.
What twist rate do the 76gr A-Tip bullets need?
This is a heavy-for-caliber bullet, so it wants a fast twist. A 1:8 barrel will stabilize it and a 1:7 or faster twist is ideal. If your .22 has a slower twist, you'll likely see better results with a lighter bullet.
What is the ballistic coefficient of the Hornady A-Tip Match 76gr?
It carries a G1 BC of .413 and a G7 BC of .208, with a sectional density of .216. Those numbers put it among the slipperier .224 match bullets, which means it holds velocity and bucks wind well at distance. That high BC is exactly why long-range reloaders gravitate toward the A-Tip line.
What cartridges are these A-Tip bullets good for?
They're a strong match for fast-twist .224 cartridges like the 22 Creedmoor, 22 ARC, and similar high-velocity builds running a 1:8 or faster barrel. They're built for target and match work where consistency matters most. Always begin with Hornady's published load data and work up carefully in your specific rifle.



Reviews
There are no reviews yet.