Description
Hornady's A-Tip Match line is about one thing: ballistic consistency at long range, and the 25 Cal .257 138 grain delivers it in a package precision handloaders have been waiting for. The standout feature is that machined aluminum tip. It runs longer than a typical polymer tip, which shifts the bullet's center of gravity rearward and helps it stay stable in flight. The result is a high ballistic coefficient and tighter dispersion when you stretch the distance out.
What Sets the 25 Cal A-Tip Match Apart
These come from the Hornady Ballistic Development Group, and the engineering shows. The flat meplat on the tip is part of their DVRT (Drag Variability Reduction Technology) design, which keeps drag uniform bullet to bullet so you see less vertical spread at distance. Hornady lists a G1 BC of .695 and a G7 of .350, with a sectional density of .298 at 138 grains. Doppler radar verified that low drag number, and the bullets are forgiving of twist rate, seating depth, and muzzle velocity, which makes load development a little less painful.
Loading the 138gr .257 A-Tip
One thing worth knowing before you set up your press: use of the dedicated A-Tip seating stem is recommended for proper seating. The long ogive and extended nose don't sit well in a lot of standard seating stems, which can lead to runout or a ring pressed into the jacket. Hornady machines a stem specifically for this profile to fit their Custom Grade dies, and plenty of reloaders will tell you it makes a real difference in concentricity.
Another nice touch is how these are packed. The A-Tip bullets are sequentially packaged, one clone after the next, with minimal handling through manufacturing. That attention to uniformity is exactly what you want feeding a long-range match rifle in 25 Creedmoor, 257 Weatherby, or any of the fast .25s that reward a high-BC projectile. The recommended twist rate is 1-7.5 to keep these stabilized.
Key Specifications
- Manufacturer: Hornady
- Product Line: A-Tip Match
- Manufacturer Part Number: 2562
- UPC: 090255225624
- Caliber: 25 Cal (.257)
- Bullet Diameter: .257 in
- Bullet Weight: 138 gr
- Bullet Type: A-Tip Match (aluminum tip, boat tail)
- Ballistic Coefficient (G1): .695
- Ballistic Coefficient (G7): .350
- Sectional Density: .298
- Recommended Twist Rate: 1-7.5
- Application: Target / Match
- Quantity: 100 count
What’s Included
- 100 Hornady A-Tip Match 25 Cal .257 138 gr bullets
- Polishing bag for prepping bullets before loading
Frequently Asked Questions
Do I really need the A-Tip seating stem to load these?
Hornady recommends their dedicated A-Tip seating stem for proper, repeatable seating. The long machined nose and ogive on these bullets don't contact standard seating stems the way they should, which can cause runout or leave a ring in the jacket. The Hornady stem is cut for this exact profile and fits their Custom Grade dies, so most reloaders chasing match accuracy use it.
What's the ballistic coefficient on the 138 grain .257 A-Tip Match?
These carry a G1 BC of .695 and a G7 BC of .350, with a sectional density of .298. That high BC was verified with Doppler radar, which is a big part of why the A-Tip line holds velocity and resists wind so well at extended range.
What twist rate do I need to stabilize these bullets?
Hornady lists a recommended twist rate of 1-7.5 for the 138 grain .257 A-Tip. Because these are low-drag bullets, they're fairly forgiving of twist, seating depth, and muzzle velocity, but a 1-7.5 or faster barrel will keep them stable and shooting their best.
Are these loaded ammunition or component bullets?
These are component bullets for reloading only, not loaded ammunition. You'll need brass, powder, primers, and dies to build finished cartridges. The box holds 100 projectiles designed for precision target and match work in the 25 caliber family.




Reviews
There are no reviews yet.