Description
Anyone who loads for a fast-twist .22 and spends weekends thinning out ground squirrels knows the V-MAX name. These are Hornady's 40 grain .224 diameter bullets, the industry benchmark for varmint work, and they pack a lot of engineering into a small package. The red polymer tip isn't just for looks. It sits over a hollow cavity that acts like a wedge on impact, raising the ballistic coefficient to .200 (G1) for flatter flight and kicking off the kind of explosive expansion V-MAX built its reputation on. The swaged lead core and match-grade copper jacket keep things concentric, which is what you feel downrange as tight groups.
What the V-MAX .224 40 gr Delivers Downrange
At 40 grains this is the light end of the .224 lineup, so it leaves the muzzle fast and shoots flat. Recommended muzzle velocity runs a wide window, roughly 2,000 up past 4,000 fps, so it's right at home in everything from .223 Rem and .22-250 to the .220 Swift and other speedy twenty-twos. Sectional density sits at .114. The thin jacket and designed core come apart in dramatic fashion on small game, which is exactly what you want for clean work on varmints and keeping ricochets down.
Loading the Hornady V-MAX Into Your Varmint Rifle
These are component projectiles, not loaded ammo, so you'll be seating them over your own powder charge and brass. The copper jacket is built to hold together through the fast twist rates found on modern varmint barrels, and the consistent construction from bullet to bullet is what makes load development less of a headache. If you've had good luck with factory Varmint Express or Superformance Varmint loads, this is the same projectile, now in your hands to tune.
The 250 count box gives you plenty of runway for sighting in, load workups, and a good chunk of trigger time before you need to reorder. For prairie dogs, rockchucks, coyotes on the lighter end, and general small-game duty, it's tough to beat the track record this bullet has earned.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 22416
- UPC: 090255224160
- Product Line: V-MAX
- Caliber: .22 Caliber
- Bullet Diameter: .224"
- Bullet Weight: 40 Grain
- Bullet Type: V-MAX Polymer Tip Boat Tail
- Tip Material: Red Polymer
- Jacket Material: Copper
- Core Material: Swaged Lead
- Ballistic Coefficient (G1): 0.200
- Sectional Density: 0.114
- Minimum Expansion Velocity: 1,600 fps
- Application: Varmint / Small Game
- Quantity: 250 Per Box
What’s Included
- 250 Hornady V-MAX .22 Caliber .224" 40 grain polymer tip boat tail bullets (unloaded component projectiles)
Frequently Asked Questions
Are these Hornady V-MAX .224 bullets loaded ammunition?
No, these are component projectiles only, meant for handloading. You supply your own brass, primer, and powder, then seat these 40 grain bullets to build your load. They are the same V-MAX projectile Hornady uses in its factory Varmint Express and Superformance Varmint ammo.
What cartridges can I load the 40 grain V-MAX .224 in?
The .224 diameter works in common .22 centerfires like the .223 Remington, .22-250, .220 Swift, and similar fast varmint rounds. With a recommended muzzle velocity window running from about 2,000 fps up past 4,000 fps, it suits both mild and high-velocity loads. Match the bullet to your rifle's twist rate for best stability.
What makes the V-MAX good for varmint hunting?
The red polymer tip raises the ballistic coefficient to .200 for flatter flight, and on impact it drives into the hollow cavity to trigger rapid, explosive expansion. The swaged lead core and match-grade copper jacket deliver the kind of concentricity that produces tight groups. It expands dramatically even at velocities as low as 1,600 fps.
How many bullets come in this box?
This box holds 250 of the 40 grain .224 V-MAX projectiles. That is a solid supply for load development, sighting in, and a good run of varmint shooting before you reorder.



Reviews
There are no reviews yet.